No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(100KTL, 110KTL, 125KTL) Series User Manual

This document describes the SUN2000-125KTL-M0,SUN2000-110KTL-M0,SUN2000-100KTL-M0,SUN2000-100KTL-M1 and SUN2000-100KTL-INM0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074693, 01074694, 01074695, 01074695-001 and 01074695-002.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Label Description

Label Description




Running warning

Potential hazards exist after the inverter is powered on. Take protective measures when operating the inverter.

Burn warning

Do not touch a running inverter, as the shell becomes hot during operation.

Large current warning

Before powering on the inverter, ensure that the inverter is grounded because there is a large contact current after the inverter is powered on.

Delayed discharge

  • High voltage exists after the inverter is powered on. Only qualified and trained electrical technicians are allowed to perform operations on the inverter.
  • Residual voltage exists after the inverter is powered off. It takes 15 minutes for the inverter to discharge to the safe voltage.

Refer to documentation

Reminds operators to refer to the documents shipped with the inverter.


Indicates the position for connecting the protective earthing (PE) cable.

Operation warning

Do not remove the DC input connector when the inverter is running.

Fan operation warning

High voltage exists after the inverter is powered on. Do not touch the fans when the inverter is working.

Fan replacement warning

Before replacing a fan, disconnect its power connectors.

Inverter ESN label

Indicates the inverter serial number.

Weight label

The inverter needs to be carried by four persons or using a pallet truck.

Updated: 2019-12-25

Document ID: EDOC1100087908

Views: 5568

Downloads: 667

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next