No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(100KTL, 110KTL, 125KTL) Series User Manual

This document describes the SUN2000-125KTL-M0,SUN2000-110KTL-M0,SUN2000-100KTL-M0,SUN2000-100KTL-M1 and SUN2000-100KTL-INM0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074693, 01074694, 01074695, 01074695-001 and 01074695-002.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Shutdown and Power-Off

Shutdown and Power-Off

Context

  • If two SUN2000s share the same AC switch on the AC side, power off the two SUN2000s.
  • After the SUN2000 powers off, the remaining electricity and heat may still cause electric shocks and body burns. Therefore, put on protective gloves and begin servicing the SUN2000 15 minutes after the power-off.

Procedure

  1. Run a shutdown command on the SUN2000 app, SmartLogger, or NMS.

    For details, see Man-Machine Interactions, or the SmartLogger or NMS user manual.

  2. Turn off the AC switch between the SUN2000 and the power grid.
  3. Set all DC switches to OFF.
Download
Updated: 2020-02-27

Document ID: EDOC1100087908

Views: 8523

Downloads: 1084

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next