No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Determining the Serial Numbers of S Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Determining the Serial Numbers of S Series Switches

Determining the Serial Numbers of S Series Switches

Introduction

This document describes how to determine the serial numbers of S series switches. The serial numbers of devices are necessary for network construction and device maintenance. These serial numbers are fixed and cannot be modified.

Prerequisites

This document applies to S series modular switches and S series fixed switches.

Determining the Serial Number of a Modular Switch

Method 1: Determine the Chassis Serial Number by Using a Command

On a standalone switch

Run the display elabel backplane command to view electronic label information. In the command output, BarCode specifies the chassis serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding chassis parameters.

<HUAWEI> display elabel backplane
Info: It is executing, please wait... 

[BackPlane_1]
/$[ArchivesInfo Version] 
/$ArchivesInfoVersion=3.0 

[Board Properties] 
BoardType=EH02BAKK 
BarCode=2102113089P0BB000881
Item=02113089 
......    

In a CSS

Log in to the master switch through Telnet or the console port, and run the display elabel backplane chassis chassis-id command in the user view to view electronic label information. In the command output, BarCode specifies the chassis serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding chassis parameters.

<HUAWEI> display elabel backplane chassis ?
 INTEGER<1-2>  Chassis ID                                                       
<HUAWEI> display elabel backplane chassis 2
Info: It is executing, please wait...                                            

[BackPlane_2]
/$[ArchivesInfo Version] 
/$ArchivesInfoVersion=3.0 

[Board Properties]                                                               
BoardType=EH02BAKK 
BarCode=2102113089P0BB000881
Item=02113549                                                                    
......   
NOTE:

You can run the display device manufacture-info command to view the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Determine the Chassis Serial Number Through the Web System

After web NMS is enabled on a switch, you can view the chassis serial number through the web system.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to the switch through the web system and click Monitor on the toolbar to enter the Monitor page. You can view device information, including the chassis serial number, as shown in Figure 1-1.

Figure 1-1 System Description

Classic web system

Log in to the switch through the web system, and click Device Summary on the toolbar to view device information, including the chassis serial number, as shown in Figure 1-2.

Figure 1-2 System Description

Method 3: Determine the Chassis Serial Number Onsite

You can determine the chassis serial number onsite. The chassis serial number label is attached to the top side of the chassis, as shown in Figure 1-3.

Figure 1-3 Location of the serial number label

Determining the Serial Number of a Fixed Switch

Method 1: Determine the Device Serial Number by Using a Command

Run the display elabel slot slot-id command to view electronic label information. slot-id specifies the slot ID of the switch. In the command output, BarCode specifies the device serial number.

<HUAWEI> display elabel slot 0
/$[System Integration Version] 
/$SystemIntegrationVersion=3.0 


[Slot_0]
/$[Board Integration Version] 
/$BoardIntegrationVersion=3.0 


[Main_Board]

/$[ArchivesInfo Version]       
/$ArchivesInfoVersion=3.0        


[Board Properties] 
BoardType=CX22EFGEA       
BarCode=2102351820109C000451
Item=02351820  
......    
NOTE:

You can run the display device manufacture-info command to view the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Determine the Device Serial Number Through the Web System

After web NMS is enabled on a switch, you can view the device serial number through the web system.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to the switch through the web system, and click Monitor on the toolbar to view device information, including the device serial number, as shown in Figure 1-4.

Figure 1-4 System description

Classic web system (not supported in V200R011C10 and later versions)

Log in to the switch through the web system, and click Device Summary on the toolbar to view card information, including the device serial number, as shown in Figure 1-5.

Figure 1-5 Card information

Method 3: Determine the Device Serial Number by Viewing the Serial Number Label

  • The device serial number label is attached to the rear side of a switch.

NOTE:

The serial number label has a total of 20 characters, for example, 210235383610C3000006. The serial number shown in the figure is for your reference only. Where the serial number label is located on the rear side of a switch varies according to the device model.

  • The device serial number label is attached to the front side of a switch.

  • The device serial number label is attached to the top of a switch, on the corner closest to the left of the interface side.

  • The removable device serial number label is in the middle of the rear side of a switch.

  • The removable device serial number label is in the middle of the left part on the rear side of a switch.

  • The removable device serial number label is at the lower left of the rear panel.

Determining the Serial Number of a Card

Method 1: Determine the Card Serial Number by Using a Command

Run the display elabel command to view electronic label information and select the slot ID according to the command prompt information. In the command output, BarCode specifies the card serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding card parameters.

<HUAWEI> display elabel ?
 <1-1>      The present chassis                                                 
  backplane  Backplane                                                           
  brief      Display information briefly                                         
  <cr>  
<HUAWEI> display elabel 1/?
 <4,6-8>                                 <CMU1> 
 <FAN1-FAN2>                             <PWR1-PWR2> 
<HUAWEI> display elabel 1/6 brief
Info: It is executing, please wait...                                            


[Slot_6]                                                                        
/$[Board Integration Version]                                                    
/$BoardIntegrationVersion=3.0                                                    


[Main_Board]                                                                     
/$[ArchivesInfo Version]                                                         
/$ArchivesInfoVersion=3.0                                                        


[Board Properties]                                                               
BoardType=ES1D2S08SX1E 
BarCode=020LVF6TBB000043
Item=03020LVF                                                                     
......     
NOTE:

You can run the display device manufacture-info command to view the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Determine the Card Serial Number Through the Web System (Supported only on MPUs and LPUs)

After web NMS is enabled on a switch, you can view the card serial number through the web system.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to the switch through the web system, and click Monitor on the toolbar to enter the Monitor page. You can view card information. Move the mouse pointer to a card to display basic information about the card , including port, version, and serial number, as shown in Figure 1-6.

Figure 1-6 Basic card information

Classic web system

Log in to the switch through the web system, and click Device Summary on the toolbar to enter the Device Summary page. Click the corresponding board on the switch to enter the Board Information page. On the Slot Basic Information tab, you can view basic board information, including the board serial number, as shown in Figure 1-7.

Figure 1-7 Basic slot information

Method 3: Determine the Card Serial Number Onsite

You can determine the card serial number onsite. The location of a card serial number label varies according to the card model.

  • The card serial number label is on the upper right corner of the card panel.
  • The card serial number label is on the upper left corner of the card panel.
  • The card serial number label is on the PCB of the card.

Determining the Serial Number of a Power Module

Method 1: Determine the Power Module Serial Number by Using a Command

Run the display elabel command to view electronic label information and select the power module number according to the command prompt information. In the command output, SN specifies the power module serial number.

<HUAWEI> display elabel ?
  <1-1>      The present chassis                                                 
  backplane  Backplane                                                           
  brief      Display information briefly                                         
  <cr>  
<HUAWEI> display elabel 1/?
  <5,8,13,16>                             <CMU1> 
  <FAN1-FAN5>                             <PWR1-PWR4> 
<HUAWEI> display elabel 1/PWR1
Info: It is executing, please wait...                                            

[Slot_21]                                                                        
/$[Board Integration Version]                                                    
/$BoardIntegrationVersion=3.0                                                    


[Main_Board]                                                                     
DATE=13_02_08                                                                    
SN=2102310JFA6TGC907205
NOTE:

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding power module parameters.

Method 2: Determine the Power Module Serial Number Onsite

You can determine the power module serial number onsite. Table 1-1 lists the location of the power module serial number label.

Table 1-1 Location of the power module serial number label

Power Module Type

Serial Number Label Location

  • 1600 W DC power module
  • 2200 W DC power module

The serial number label is attached on the power module panel, as shown in Figure 1-8.

  • 800 W AC power module
  • 2200 W AC power module

The serial number label is attached on the right shell, as shown in Figure 1-9.

Figure 1-8 Location of the serial number label (A 2200 W DC power module is used as an example.)

Figure 1-9 Location of the serial number label (A 2200 W AC power module is used as an example.)

Determining the Serial Number of a Fan Module

Method 1: Determine the Fan Module Serial Number by Using a Command

Run the display elabel command to view electronic label information and select the fan module number according to the command prompt information. In the command output, BarCode specifies the fan module serial number.

<HUAWEI> display elabel ?
  <1-1>      The present chassis                                                 
  backplane  Backplane                                                           
  brief      Display information briefly                                         
  <cr>  
<HUAWEI> display elabel 1/?
  <5,8,13,16>                             <CMU1> 
  <FAN1-FAN5>                             <PWR1-PWR4> 
<HUAWEI> display elabel 1/FAN2
Info: It is executing, please wait...                                            

[Slot_18]                                                                        
/$[Board Integration Version]                                                    
/$BoardIntegrationVersion=3.0                                                    


[Main_Board]                                                                     
/$[ArchivesInfo Version]                                                         
/$ArchivesInfoVersion=3.0                                                        


[Board Properties]                                                               
BoardType=LE02FCMC                                                               
BarCode=2103010JTF0123456789
Item=02120995                                                                    
......     
NOTE:

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding fan module parameters.

Method 2: Determine the Fan Module Serial Number Onsite

You can determine the fan module serial number onsite. The fan module serial number label is attached on the upper right corner at the front side and is a one-dimensional label, as shown in Figure 1-10.

Figure 1-10 Location of the serial number label

Determining the Serial Number of an Optical Module

Method 1: Determine the Optical Module Serial Number by Using a Command

  • Run the display elabel command to view the electronic label of an optical module. BarCode indicates the serial number of the optical module.
    <HUAWEI> display elabel 
    ...... 
    [Port_XGigabitEthernet4/0/1] 
    /$[ArchivesInfo Version] 
    /$ArchivesInfoVersion=3.0 
     
     
    [Board Properties] 
    BoardType=PLRXPLSCS4322N 
    BarCode=CB02UF1SW 
    Item= 
    Description=10300Mb/sec-850nm-LC-33(OM1),82(OM2),300(OM3),400(OM4) 
    Manufactured=2011-01-09 
    /$VendorName=JDSU 
    IssueNumber= 
    CLEICode= 
    BOM= 
    ......
  • Run the display transceiver interface interface-type interface-number command to view information about a specified optical module. Manu. Serial Number indicates the serial number of the optical module.
    <HUAWEI> display transceiver interface gigabitethernet 9/0/21 
     
    GigabitEthernet9/0/21 transceiver information: 
    ------------------------------------------------------------- 
    Common information: 
      Transceiver Type               :UNKNOWN_SFP 
      Connector Type                 :LC 
      Wavelength(nm)                 :850 
      Transfer Distance(m)           :80(50um),30(62.5um),300(OM3) 
      Digital Diagnostic Monitoring  :YES 
      Vendor Name                    :JDSU 
      Vendor Part Number             :PLRXPLSCS4322N 
      Ordering Name                  : 
    ------------------------------------------------------------- 
    Manufacture information: 
      Manu. Serial Number        :CB02UF1SW 
      Manufacturing Date             :2011-01-09 
      Vendor Name                    :JDSU 
    ------------------------------------------------------------- 
    Alarm information: 
      RX loss of signal 
      RX power low 
    -------------------------------------------------------------

Method 2: Determine the Optical Module Serial Number Onsite

You can view the label attached to an optical module to determine the serial number of the optical module.

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100088100

Views: 628

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next