Processor Configuration
This topic describes how to configure the processor on the Processor Configuration screen.
Figure 4-17 or Figure 4-18 shows the Processor Configuration screen. The TaiShan 200 (model 2280) server is used as an example. Table 4-13 describes the parameters.
Parameter |
Description |
Default Value |
|---|---|---|
Core Labeling |
Sets the CPU core reporting sequence. The options are as follows:
NOTE:
This parameter is not supported by BIOS V172 and later on TaiShan 200 servers (models 2280, 2180, 5180, and 5280) configured with Kunpeng 920 5220 or 3210 processor. |
Packed |
CPU Flex Ratio Override |
Specifies whether to enable maximum frequency setting of the CPU. The options are as follows:
|
Disable |
CPU Core Flex Ratio |
Sets the maximum frequency of the CPU. NOTE:
This parameter is available only when CPU Core Ratio Override is set to Enable. |
- NOTE:
|
Ratio Status |
Displays the frequency status of the CPU. |
- NOTE:
The value of this parameter varies according to the CPU configured on the server. Set this parameter based on site requirements. |