Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
USB Configuration
TaiShan 200 servers (models XA320 and XA320C) do not support this screen.
This section describes how to configure the USB port on the USB Configuration screen.
Figure 4-59 or Figure 4-60 shows the USB Configuration screen. Table 4-45 describes the parameters on the screen.
Table 4-45 Parameters on the USB Configuration screen
Parameter |
Description |
Default Value |
|---|---|---|
USB Controller |
Indicates the USB controller version. |
N/A |
USB3.0 Controller |
Specifies whether to enable the USB 3.0 controller. The options are as follows:
NOTE:
|
Enable |
Front USB Port X |
Indicates the USB port status. NOTE:
|
Enable |
Rear USB Port X |
Indicates the USB port status. NOTE:
The TaiShan 200 server (model 2280E) does not support this parameter. |
Enable |