Tls Auth Configuration
- Whether this configuration is available depends on the server model and BIOS version.
- TaiShan 200 servers (models XA320 and XA320C) do not support this menu.
On the Tls Auth Configuration screen, you can configure TLS authentication. Figure 4-64 shows the Tls Auth Configuration screen. Table 4-48 describes the parameters.
Parameter |
Description |
|---|---|
Server CA Configuration |
Provides access to server CA certificate configuration. |
Server CRL Configuration |
Provides access to server CRL certificate configuration. NOTE:
This parameter is supported only by TaiShan 200 Pro servers (models 2480, 2280, and 2280VF). |
Figure 4-65 shows the Server CA Configuration screen. Figure 4-66 shows the Server CRL Configuration screen. Table 4-50 describes the parameters.
Parameter |
Description |
|---|---|
Enroll Cert |
Indicates the API to import a certificate. |
Delete Cert |
Deletes a certificate. |
Query Cert |
Queries a certificate. |
Figure 4-67 shows the Enroll Cert screen. Table 4-50 describes the parameters.
Parameter |
Description |
|---|---|
Enroll Cert Using File |
Imports the certificate using a file system. |
Cert GUID |
Sets the certificate GUID. |
Commit Changes and Exit |
Saves the changes and exits. |
Discard Changes and Exit |
Discards the changes and exits the screen. |
Figure 4-68 shows the Enroll Cert Using File screen. The screen varies according to the hard drive, DVD-ROM drive, and USB flash drive configured for the server.
Figure 4-69 shows the Delete Cert screen. On this screen, you can delete a loaded certificate.
If a certificate exists, the certificate list is displayed on the Delete Cert screen. If no certificate exists, no information is displayed.
