Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring iBMC Network Information
Scenarios
Configure iBMC network information, including the iBMC IP address, subnet mask, and gateway.
You need to obtain the following data:
- iBMC IP address
- iBMC subnet mask
- iBMC gateway
Procedure
- Access the BIOS. For details, see Accessing the BIOS.
- Press ← or → to switch to the Advanced screen shown in Figure 4-26, which is an example screen for TaiShan 200 (model 2280).
- Select IPMI iBMC Configuration and press Enter.
- Select iBMC Configuration and press Enter.
- Select IP Source under IPv4 configuration and press Enter.
- Select a mode for obtaining the iBMC IPv4 address from the displayed shortcut menu.
The default mode for obtaining the iBMC IPv4 is Static.
- Select Static and press Enter.
- Select IP Address under IPv4 configuration and press Enter.
The IP Address dialog box is displayed.
- Type the iBMC IPv4 address and press Enter.
- Select Subnet Mask under IPv4 configuration and press Enter.
The Subnet Mask dialog box is displayed.
- Enter the iBMC IPv4 subnet mask and press Enter.
- Select Gateway Address under IPv4 configuration and press Enter.
The Gateway Address dialog box is displayed.
- Type the iBMC IPv4 gateway and press Enter.
Manually configure the iBMC network information.
- Select DHCP and press Enter.
Dynamically obtain the iBMC network information using the DHCP.
- Press F10.
The system displays the "Save configuration changes and exit?" dialog box.
- Select Yes and press Enter.
The server automatically restarts for the settings to take effect.
