Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QSFP-40G-SDLC-PAM
Table 8-57 QSFP-40G-SDLC-PAM Specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-SDLC-PAM |
| Part Number | 02311PUU |
| Model | QSFP-40G-SDLC-PAM |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| Transmission rate [bit/s] | 40 Gbit/s |
| Target transmission distance [km] |
Multimode fiber (OM3): 100 m Multimode fiber (OM4): 150 m |
| Form factor | QSFP+ |
| Application standard | 40GBASE-PAM4 (non-standard) |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 2.4 dBm |
| Minimum Tx optical power [dBm] | -2.5 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -8.0 dBm |
| Overload power [dBm] | 2.4 dBm |
|
NOTE:
This module can only be used on a switch running V200R011C10 or a later version. This module does not support unidirectional single-fiber communication. |
|
