Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-1000BaseT
Table 8-26 SFP-1000BaseT Specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | SFP-1000BaseT |
| Part Number | 02314171 |
| Model | SFP-1000BaseT |
| Connector type | RJ45 |
| Optical fiber type | - |
| Transmission rate [bit/s] |
10 Mbit/s 100 Mbit/s 1 Gbit/s |
| Target transmission distance [km] | Ethernet cable: 0.1 km |
| Form factor | SFP |
| Application standard | 1000BASE-T |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | - |
| Maximum Tx optical power [dBm] | - |
| Minimum Tx optical power [dBm] | - |
| Minimum extinction ratio [dB] | - |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | - |
| Overload power [dBm] | - |
|
NOTE:
The transmission speed varies depending on the port where the copper transceiver module is used. Surge protection: ± 1 kV in common mode. |
|
