Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LST7C02BX6E0 (2-Port 100GE QSFP28 Interface and 4-Port 40GE QSFP+ Interface Card (X6E, QSFP28))
Overview
Table 6-106 Basic information about the LST7C02BX6E0
| Item | Details |
|---|---|
| Description | 2-Port 100GE QSFP28 Interface and 4-Port 40GE QSFP+ Interface Card (X6E, QSFP28) |
| Part Number | 03033UGS |
| Model | LST7C02BX6E0 |
Appearance
Figure 6-53 Appearance of the LST7C02BX6E0
![]()
Version Mapping
Table 6-107 Mappings between LST7C02BX6E0 and product sub-series
| Product Sub-Series | First Supported Version | Unsupported Model | Limitations | IDs of available slots |
|---|---|---|---|---|
| S12700E | V200R020C00 | - | - |
|
Indicators
Figure 6-54 Indicators on the LST7C02BX6E0
![]( "Click to enlarge")
1. ACT/LINK indicator |
2. RUN/ALM: running status indicator |
Table 6-108 Indicators on the LST7C02BX6E0
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| - | ACT/LINK | Green | Steady on | A link has been established on the port. |
| Green | Blinking | The port is transmitting and receiving data. | ||
| RUN/ALM | Running status indicator | Green | Steady on | The card is powered on. If the indicator is steady green for no more than 30 seconds, the CPU is being started. If the indicator is steady green for more than 30 seconds, the software is not running. |
| Green | Slow blinking | The card software is running properly. | ||
| Green | Fast blinking | The card software is starting. | ||
| Red | Steady on | The card has failed and the fault requires manual intervention. | ||
| Yellow | Steady on | The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.) |
Ports
Figure 6-55 Ports on the LST7C02BX6E0
![]( "Click to enlarge")
1. Two 100GE optical ports |
2. Four 40GE optical ports |
Table 6-109 Ports on the LST7C02BX6E0
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 100GE optical port | QSFP28 | 100GE optical ports to transmit and receive service traffic at 40 Gbit/s or 100 Gbit/s | |
| 40GE optical port | QSFP+ | 40GE optical ports to transmit and receive service traffic at 40 Gbit/s |
Functions and Features
Table 6-110 Functions and features of the LST7C02BX6E0
| Functions and Features | Description |
|---|---|
| Basic function | Provides two 100GE optical ports and four 40GE optical ports for data transmission and switching. |
| Distributed forwarding | Performs concurrent data forwarding using a distributed data plane. |
| Hot swapping | Supported |
Technical Specifications
Table 6-111 Technical specifications of the LST7C02BX6E0
| Item | Details |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 160 mm x 510 mm x 570 mm (6.3 in. x 20.1 in. x 22.44 in.) |
| Weight without packaging [kg(lb)] | 3.55 kg (7.83 lb) |
| Typical power consumption [W] | 155 W |
| Typical heat dissipation [BTU/hour] | 528.88 BTU/hour |
| Maximum power consumption [W] | 175 W |
| Maximum heat dissipation [BTU/hour] | 597.12 BTU/hour |
| Memory | 1 GB |
| Flash memory | 128 MB |
