Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set LAN Parameters?
If the teamwork networking mode is FE networking, set the LAN parameters based on the actual situation.
Procedure
- On the home screen, choose , and set LAN IP assigning mode to Manual. Set LAN IP address, LAN subnet mask, and LAN gateway based on the actual plan.Figure 12-12 LAN IP Settings
- If the LAN IP address of the unit has not been changed, the LAN IP address of each unit in the group is reallocated when the Teamwork function is enabled.
- If the LAN IP address of the unit has been changed, the LAN IP address of the unit remains unchanged when the Teamwork function is enabled.
- The LAN IP address must be in the 192.168.248.X network segment.
