Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Manage WebUI Users?
Context
WebUI users are classified into administrator, engineer, and operator. They have different operation rights.
- Administrator: This role has all rights, including the rights for user management, browsing and modifying parameters, software upgrade, and data import and export. The user name is admin and the preset password is Changeme by default.
- Engineer: Compared with the administrator, only the user management function is unavailable to this role. There is no default user name. If necessary, add an engineer account.
- Operator: Compared with the administrator, this role has no rights for network security certificates, Modbus, SNMP, software upgrade, and fault information. There is no default user name. If necessary, add an operator account.
Procedure
- Change the login password.
- Choose the admin user and click Modify. Reset the login password on the displayed page and click Confirm.Figure 12-24 Changing the login password
- Enter Login user password and click Submit.Figure 12-25 Recertification
- Choose the admin user and click Modify. Reset the login password on the displayed page and click Confirm.
- Add a WebUI user.
- Enter information about the new user and click Confirm.Figure 12-26 User Management
After Multi-factor Authentication is enabled and the notification mode is configured, the following functions can be implemented:
- Retrieve the password if you forgot it. On the login page, click Forgot password, enter related information to obtain a verification code, and reset the login password.
- A verification code is used for login.
- On the user management page, you can modify, delete, lock, and unlock a user.
- If the password is not complex enough, the system displays the message The password does not meet complexity requirements. Please enter a password again.
- If the password is found to be weak, the system displays the message Weak password. Enter another password. Examples of weak passwords are Password, Admin_1243, and Changeme_123.
- Advance Warning Before Expires cannot exceed Password Validity Period. Password Validity Period cannot exceed Account Password Period.
- The WebUI supports a maximum of 20 users and a maximum of 3 concurrent online users.
- Enter information about the new user and click Confirm.
