Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Pallet
Procedure
- Use a 10# socket wrench to remove the eight M6x16 screws securing the fasteners to the cabinet, and use an 18# socket wrench to remove the four M12x35 screws securing the fasteners to the pallet, as shown in Figure 4-29.
- Remove the cabinet from the pallet.
