Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operations with a USB Flash Drive
Context
After connecting a USB flash drive to the USB port on the main control module, you can export data, import and export configuration files, and import certificates and keys.
- You are advised to use the FAT32 USB flash drive with a capacity less than or equal to 64 GB. For a non-FAT32 USB flash drive, format it to the FAT32 format using a computer.
- Before using a USB flash drive, ensure that its data has been scanned by antivirus software and is secure.
Procedure
- Connect a USB flash drive.Figure 12-5 Connecting to a USB flash drive
- Check that
is displayed in the status bar of the home screen, indicating that the USB flash drive is successfully identified.
- Select an operation in USB Operations and perform the operation as prompted.Figure 12-6 USB Operations
- Tap Remove USB to remove the USB flash drive in safe mode.
- Remove the USB flash drive and set it aside.
is displayed in the status bar of the home screen, indicating that the USB flash drive is successfully identified.