Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NetCol500-A080 Electric Control Box Layout
Figure C-5 NetCol500-A080 electric control box (without a temperature control intelligent monitoring board)
(1) PE bar |
(2) Fan switch (QF1) |
(3) Receiver heater/Water-cooled module (QF2) |
(4) Fan terminal |
Figure C-6 NetCol500-A080 electric control box (with a temperature control intelligent monitoring board)
(1) PE bar |
(2) RS485 communication line terminal (RS485+, RS485–, GND) |
(3) Fan switch (QF1) |
(4) Receiver heater/Water-cooled module (QF2) |
(5) Fan terminal |
(6) Temperature control intelligent monitoring board |
The temperature control intelligent monitoring board is located on the inner cover of the electric control box.