Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Parts Replacement
After replacing any part, verify that the new part works properly.
- Replacing an Air Filter
- Replacing an Indoor Fan
- Replacing an Outdoor Fan
- Replacing a Differential Pressure Switch
- Replacing a Pressure Switch or Pressure Sensor
The procedure for replacing a high pressure sensor or low pressure sensor is similar to that of replacing a high pressure switch. The following describes how to replace a high pressure switch. - Replacing a Compressor (Threaded Connection)
- Replacing a Compressor (Welding)
- Replacing a Filter Dryer (Threaded Connection)
- Replacing a Filter Dryer (Welding)
- Replacing a Liquid Level Detector
- Replacing a Condensate Pump
- Replacing a Wet Film Humidifier
- Replacing a Display Module
- Replacing a Main Control Module or PSU
- Replacing an Electric Heater