Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Pallet
Context
- Wear protective gloves when unpacking the device.
- Choose railways, sea, or a road with good conditions during transportation. No excessive tilt or jolt is allowed during transportation.
- Use a pallet truck to transport the cabinet secured to a wooden base to the installation position. Insert the forks of the pallet truck in the middle position to ensure balance.
- To prevent shocks or falls, move the cabinet gently.
- After placing the cabinet in the installation position, unpack it and take care to prevent scratches. Keep the cabinet steady during unpacking.
Procedure
- Remove the packing materials such as the carton, stretch wrap, foam, condenser protection cardboard, and plastic bags.
- Check the accessories against the accessory list.
- Remove the three bolts from each of the four corner fittings (one bolt for connecting the corner fitting to the pallet). Then remove the outdoor unit from the pallet, as shown in Figure 4-39.
