Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Outdoor Unit Power Cable
- The outer insulation sheath should be retained when you route a cable through the waterproof connector.
- Ensure that the phase sequence is correct when connecting cables.
- Route the outdoor unit power cable through the cabinet cable hole and connect the cable to the 1U, 1V, and 1W wiring terminals on the indoor unit.
- Connect the PE cable to the ground bar of the outdoor unit, as shown in Figure 4-83.
- Secure the cable on the post of the cabinet with cable ties.
