TaiShan 200 Server Maintenance and Service Guide (Model 2280) 14

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

About This Document

Purpose

This document describes the physical structure, components, and specifications of the 2280 balanced model of the TaiShan 200 server (TS200-2280 for short). It provides guidance for installing, removing, powering on, powering off, configuring, and troubleshooting the server.

Intended Audience

This document is intended for:

Huawei technical support engineers
Channel partners' technical support engineers
Enterprise administrators

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol	Description
	Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.
	Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.
	Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.
	Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury.
	Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue	Date	Description
14	2023-08-11	Added information about the 8 x 2.5-inch SAS/SATA drive pass-through configuration.
13	2023-07-12	Added information about the SP686C PCIe plug-in RAID controller card for the 12 x 3.5-inch drive RAID pass-through configuration. Added information about the 24 x 2.5-inch drive RAID pass-through configuration.
12	2021-09-29	This issue is the twelfth official release.
11	2021-05-31	This issue is the eleventh official release.
10	2021-01-12	Added information about the Hi1711 iBMC card.
09	2020-08-14	Added the 8 x 2.5-inch drive configuration.
08	2020-06-29	Added the "Powered by Kunpeng" label on the front panel.
07	2020-04-15	Updated the memory specifications of servers with Kunpeng 920 5220 or 3210 processors. Updated the L3 cache capacity of servers with Kunpeng 920 5220 or 3210 processors.
06	2020-03-03	Modified the description of power consumption.
05	2020-01-16	Added information about how to configure the server with Kunpeng 920 5220 or 3210 processors. Added information about the WebUI of iBMC V561 and later versions.
04	2019-12-17	Added the 24 x 2.5-inch SAS/SATA drive pass-through configuration.
03	2019-11-14	Changed the product name. Added the FlexIO card with four 25GE optical ports.
02	2019-07-01	Added some server models.
01	2019-06-15	This issue is the first official release.

Translation

简体中文

Download

Updated: 2023-08-17

Document ID: EDOC1100093458

Downloads: 607

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate