Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

17

2025-07-27

Added the description of I/O module 3 to the 12 x 3.5-inch drive expander configuration in Table 2-8.

16

2024-10-18

Added temperature and humidity specifications. For details, see Environmental Specifications.

15

2024-07-15

• Added the restrictions on riser cards for the SP686C RAID controller card. For details, see Riser Cards and PCIe Slots.
• Added the description of 900 W AC Titanium PSUs' output power. For details, see PSU Specifications.
• Added the port description. For details, see Technical Specifications.

14

2024-04-09

• Optimized the "Maintenance and Warranty" section.
• Optimized the "Logging In to the Server Using the Independent Remote Console" section.

13

2023-08-11

Added the configuration of the 8 x 2.5-inch SAS/SATA drives in pass-through mode.

12

2023-07-12

Added the configuration of 24 x 2.5-inch drives in RAID pass-through mode.

11

2021-05-31

This issue is the eleventh official release.

10

2021-01-12

Added the 1711 iBMC card information.

09

2020-08-14

Added the 8 x 2.5-inch drive configuration.

08

2020-06-29

Added the "Powered by Kunpeng" label on the front panel.

07

2020-04-15

• Updated the memory specifications of servers powered by Kunpeng 920 5220 or 3210 processors.
• Updated the L3 cache capacity of servers powered by Kunpeng 920 5220 or 3210 processors.

06

2020-03-03

Modified the power consumption description.

05

2020-01-16

• Added information about servers powered by Kunpeng 920 5220 or 3210 processors.
• Added information about the WebUIs of iBMC V561 and later versions.

04

2019-12-17

Added the 24 x 2.5-inch SAS/SATA pass-through drive configuration.

03

2019-11-14

• Changed the product name.
• Added the FlexIO card with four 25GE optical ports.

02

2019-07-01

Added some server models.

01

2019-06-15

This issue is the first official release.