Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CEL48XSFD-GK (48-port 10GE interface card (FD-GK, SFP+))
CEL48XSFD-GK (03059594: 48-port 10GE interface card (FD-GK, SFP+))
Overview
Table 6-403 Basic information about the CEL48XSFD-GK
| Item | Details |
|---|---|
| Description | 48-port 10GE interface card (FD-GK, SFP+) |
| Part Number | 03059594 |
| Model | CEL48XSFD-GK |
| Silkscreen | CEL48XSFD-GK |
Appearance
Figure 6-157 Appearance of the CEL48XSFD-GK
![]()
The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.
Version Mapping
Table 6-404 Mappings between CEL48XSFD-GK and product
| Product | First Supported Version | Unsupported Model | IDs of available slots | Limitations |
|---|---|---|---|---|
| CloudEngine 16804 | V200R019C10 | - | 1–4 | - |
| CloudEngine 16808 | V200R019C10 | - | 1–8 | - |
| CloudEngine 16816 | V200R019C10 | - | 1–16 | - |
Indicators
Figure 6-158 Indicators on the CEL48XSFD-GK
![]()
1. Running status indicator |
2. Port status indicator |
Table 6-405 Indicators on the CEL48XSFD-GK
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN/ALM | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) | ||
| - | Port status indicator Two single-color indicators for each port Steady green: LINK indicator Blinking yellow: ACT indicator The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom. |
Green | Steady on | The link on the port is connected. |
| Green | Off | The link on the port is disconnected. | ||
| Yellow | Fast blinking (15 Hz) | The port is transmitting or receiving data. | ||
| Yellow | Off | The port is not transmitting or receiving data. |
Ports
Figure 6-159 Ports on the CEL48XSFD-GK
![]()
1. Forty-eight 10GE optical ports |
Table 6-406 Ports on the CEL48XSFD-GK
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 48 x 10GE optical ports | SFP+/SFP | Port for inputting and outputting 10GE/GE optical signals |
Functions and Features
Table 6-407 Functions and features of the CEL48XSFD-GK
| Functions and Features | Description |
|---|---|
| Basic function | The card provides data packet processing and traffic management on 48 10GE optical ports. |
| Maximum port density | If all LPUs are these cards:
|
| 10GE port | When the 10GE ports work in 10GE mode, they support SFP+ 10GE optical modules, 10GE high-speed cables, and AOC cables. When the 10GE ports work in GE mode, they support SFP GE optical modules and 1000BASE-T copper modules. When using a 1000BASE-T copper module, a port supports 100M/1000M auto-sensing. |
| Hot swapping | Supported |
| Restrictions and remarks | In V200R021C00 and earlier versions, this LPU is used with the CE-SFU16F-G. When the LPU is installed in slot 14, SFUs cannot work in 4+2 backup mode and can only work in 5+1 backup mode when the device works in six-SFU mode; SFUs cannot work in 3+1 backup mode or any other backup mode when the device works in four-SFU mode. |
Technical Specifications
Table 6-408 Technical specifications of the CEL48XSFD-GK
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.) |
| Weight without packaging [kg (lb)] | 6.7 kg (14.77 lb) |
| Weight with packaging [kg (lb)] | 11.6 kg (25.58 lb) |
| Typical power consumption [W] | 103 W |
| Typical heat dissipation [BTU/hour] | 352 BTU/hour |
| Static power consumption [W] | 85 W |
| Static heat dissipation [BTU/hour] | 290 BTU/hour |
| Maximum power consumption [W] | 193 W |
| Maximum heat dissipation [BTU/hour] | 659 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 4 GB |
| NOR Flash | Standard 128 MB |
CEL48XSFD-GK (03059594-001: 48-port 10GE interface card (FD-GK, SFP+))
Overview
Table 6-409 Basic information about the CEL48XSFD-GK
| Item | Details |
|---|---|
| Description | 48-port 10GE interface card (FD-GK, SFP+) |
| Part Number | 03059594-001 |
| Model | CEL48XSFD-GK |
| Silkscreen | CEL48XSFD-GK |
Appearance
Figure 6-160 Appearance of the CEL48XSFD-GK
![]()
The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.
Version Mapping
Table 6-410 Mappings between CEL48XSFD-GK and product
| Product | First Supported Version | Unsupported Model | IDs of available slots | Limitations |
|---|---|---|---|---|
| CloudEngine 16804 | V200R020C10 | - | 1–4 | If the card is used in V200R019C10SPC800, install the patch of V200R019SPH007 or a later version. |
| CloudEngine 16808 | V200R020C10 | - | 1–8 | If the card is used in V200R019C10SPC800, install the patch of V200R019SPH007 or a later version. |
| CloudEngine 16816 | V200R020C10 | - | 1–16 | If the card is used in V200R019C10SPC800, install the patch of V200R019SPH007 or a later version. |
Indicators
Figure 6-161 Indicators on the CEL48XSFD-GK
![]()
1. Running status indicator |
2. Port status indicator |
Table 6-411 Indicators on the CEL48XSFD-GK
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN/ALM | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) | ||
| - | Port status indicator Two single-color indicators for each port Steady green: LINK indicator Blinking yellow: ACT indicator The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom. |
Green | Steady on | The link on the port is connected. |
| Green | Off | The link on the port is disconnected. | ||
| Yellow | Fast blinking (15 Hz) | The port is transmitting or receiving data. | ||
| Yellow | Off | The port is not transmitting or receiving data. |
Ports
Figure 6-162 Ports on the CEL48XSFD-GK
![]()
1. Forty-eight 10GE optical ports |
Table 6-412 Ports on the CEL48XSFD-GK
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 48 x 10GE optical ports | SFP+/SFP | Port for inputting and outputting 10GE/GE optical signals |
Functions and Features
Table 6-413 Functions and features of the CEL48XSFD-GK
| Functions and Features | Description |
|---|---|
| Basic function | The card provides data packet processing and traffic management on 48 10GE optical ports. |
| Maximum port density | If all LPUs are these cards:
|
| 10GE port | When the 10GE ports work in 10GE mode, they support SFP+ 10GE optical modules, 10GE high-speed cables, and AOC cables. When the 10GE ports work in GE mode, they support SFP GE optical modules and 1000BASE-T copper modules. When using a 1000BASE-T copper module, a port supports 100M/1000M auto-sensing. |
| Hot swapping | Supported |
| Restrictions and remarks | In V200R021C00 and earlier versions, this LPU is used with the CE-SFU16F-G. When the LPU is installed in slot 14, SFUs cannot work in 4+2 backup mode and can only work in 5+1 backup mode when the device works in six-SFU mode; SFUs cannot work in 3+1 backup mode or any other backup mode when the device works in four-SFU mode. |
Technical Specifications
Table 6-414 Technical specifications of the CEL48XSFD-GK
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.) |
| Weight without packaging [kg (lb)] | 6.7 kg (14.77 lb) |
| Weight with packaging [kg (lb)] | 11.6 kg (25.58 lb) |
| Typical power consumption [W] | 103 W |
| Typical heat dissipation [BTU/hour] | 352 BTU/hour |
| Static power consumption [W] | 85 W |
| Static heat dissipation [BTU/hour] | 290 BTU/hour |
| Maximum power consumption [W] | 193 W |
| Maximum heat dissipation [BTU/hour] | 659 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 4 GB |
| NOR Flash | Standard 128 MB |
CEL48XSFD-GK (03059594-002: 48-port 10GE interface card (FD-GK, SFP+))
Overview
Table 6-415 Basic information about the CEL48XSFD-GK
| Item | Details |
|---|---|
| Description | 48-port 10GE interface card (FD-GK, SFP+) |
| Part Number | 03059594-002 |
| Model | CEL48XSFD-GK |
| Silkscreen | CEL48XSFD-GK |
Appearance
Figure 6-163 Appearance of the CEL48XSFD-GK
![]()
The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.
Version Mapping
Table 6-416 Mappings between CEL48XSFD-GK and product
| Product | First Supported Version | Unsupported Model | IDs of available slots | Limitations |
|---|---|---|---|---|
| CloudEngine 16804 | V200R021C10SPC600 | - | 1–4 | If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version. |
| CloudEngine 16808 | V200R021C10SPC600 | - | 1–8 | If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version. |
| CloudEngine 16816 | V200R021C10SPC600 | - | 1–16 | If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version. |
Indicators
Figure 6-164 Indicators on the CEL48XSFD-GK
![]()
1. Running status indicator |
2. Port status indicator |
Table 6-417 Indicators on the CEL48XSFD-GK
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN/ALM | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) | ||
| - | Port status indicator Two single-color indicators for each port Steady green: LINK indicator Blinking yellow: ACT indicator The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom. |
Green | Steady on | The link on the port is connected. |
| Green | Off | The link on the port is disconnected. | ||
| Yellow | Fast blinking (15 Hz) | The port is transmitting or receiving data. | ||
| Yellow | Off | The port is not transmitting or receiving data. |
Ports
Figure 6-165 Ports on the CEL48XSFD-GK
![]()
1. Forty-eight 10GE optical ports |
Table 6-418 Ports on the CEL48XSFD-GK
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 48 x 10GE optical ports | SFP+/SFP | Port for inputting and outputting 10GE/GE optical signals |
Functions and Features
Table 6-419 Functions and features of the CEL48XSFD-GK
| Functions and Features | Description |
|---|---|
| Basic function | The card provides data packet processing and traffic management on 48 10GE optical ports. |
| Maximum port density | If all LPUs are these cards:
|
| 10GE port | When the 10GE ports work in 10GE mode, they support SFP+ 10GE optical modules, 10GE high-speed cables, and AOC cables. When the 10GE ports work in GE mode, they support SFP GE optical modules and 1000BASE-T copper modules. When using a 1000BASE-T copper module, a port supports 100M/1000M auto-sensing. |
| Hot swapping | Supported |
Technical Specifications
Table 6-420 Technical specifications of the CEL48XSFD-GK
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.) |
| Weight without packaging [kg (lb)] | 6.7 kg (14.77 lb) |
| Weight with packaging [kg (lb)] | 11.6 kg (25.58 lb) |
| Typical power consumption [W] | 103 W |
| Typical heat dissipation [BTU/hour] | 352 BTU/hour |
| Static power consumption [W] | 85 W |
| Static heat dissipation [BTU/hour] | 290 BTU/hour |
| Maximum power consumption [W] | 193 W |
| Maximum heat dissipation [BTU/hour] | 659 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 4 GB |
| NOR Flash | Standard 128 MB |