Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CE-SFU04F-A (CE16804 Switch Fabric Unit F-A)
CE-SFU04F-A (03050ECE: CE16804 Switch Fabric Unit F-A)
Overview
Table 6-229 Basic information about the CE-SFU04F-A
| Item | Details |
|---|---|
| Description | CE16804 Switch Fabric Unit F-A |
| Part Number | 03050ECE |
| Model | CE-SFU04F-A |
| Silkscreen | CE-SFU04F-A |
Appearance
Figure 6-94 Appearance of the CE-SFU04F-A
![]()
The blue label on the left side of this card is a mixed-card prevention label. The color of mixed-card prevention labels on SFUs and LPUs to be installed on one device must be the same. Otherwise, the device will be damaged.
Version Mapping
Table 6-230 Mappings between CE-SFU04F-A and product
| Product | First Supported Version | Unsupported Model | IDs of available slots | Limitations |
|---|---|---|---|---|
| CloudEngine 16804 | V200R021C00SPC100 | - | SFU3–SFU8 | - |
Indicators and Buttons
Figure 6-95 Indicators and buttons on the CE-SFU04F-A
![]()
1. Running status indicator |
2. OFL button |
3. Wrench removal button |
Table 6-231 Indicators on the CE-SFU04F-A
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN(G)/ALM(R)/OFL(Y) | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) |
Table 6-232 Buttons on the CE-SFU04F-A
| Silkscreen | Name | Description |
|---|---|---|
| OFL | OFL button | To remove an SFU, hold down the OFL button for 6s. You can remove the SFU until the running status indicator is steady yellow. |
| - | Wrench removal button | The SFU is installed and removed using removable wrenches. To remove the wrenches from an SFU, press and hold the round button (marked by number 3 in the preceding figure) on the SFU. |
Functions and Features
Table 6-233 Functions and features of the CE-SFU04F-A
| Functions and Features | Description |
|---|---|
| Line-rate data switching | Six SFUs in a chassis constitute the switching core of the data plane and provide high-speed SerDes channels for LPUs. |
| Reliability | The device uses a single-stage multi-plane switch fabric to expand the switching capacity. The system has N+1 switching planes, which work in load balancing and redundancy mode to ensure nonstop service data switching. |
| Restrictions and remarks | In the same chassis, the SFU cannot be installed together with an SFU of a different model. |
Technical Specifications
Table 6-234 Technical specifications of the CE-SFU04F-A
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 316.5 mm x 42.4 mm x 233.6 mm (12.46 in. x 1.67 in. x 9.20 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 185 mm x 485 mm x 390 mm (7.28 in. x 19.09 in. x 15.35 in.) |
| Weight without packaging [kg (lb)] | 3.3 kg (7.28 lb) |
| Weight with packaging [kg (lb)] | 4.7 kg (10.36 lb) |
| Typical power consumption [W] | 98 W |
| Typical heat dissipation [BTU/hour] | 335 BTU/hour |
| Static power consumption [W] | 88 W |
| Static heat dissipation [BTU/hour] | 300 BTU/hour |
| Maximum power consumption [W] | 119 W |
| Maximum heat dissipation [BTU/hour] | 406 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 2 GB |
| NOR Flash | Standard 128 MB |
CE-SFU04F-A (03050ECE-001: CE16804 Switch Fabric Unit F-A)
Overview
Table 6-235 Basic information about the CE-SFU04F-A
| Item | Details |
|---|---|
| Description | CE16804 Switch Fabric Unit F-A |
| Part Number | 03050ECE-001 |
| Model | CE-SFU04F-A |
| Silkscreen | CE-SFU04F-A |
Appearance
Figure 6-96 Appearance of the CE-SFU04F-A
![]()
The blue label on the left side of this card is a mixed-card prevention label. The color of mixed-card prevention labels on SFUs and LPUs to be installed on one device must be the same. Otherwise, the device will be damaged.
Version Mapping
Table 6-236 Mappings between CE-SFU04F-A and product
| Product | First Supported Version | Unsupported Model | IDs of available slots | Limitations |
|---|---|---|---|---|
| CloudEngine 16804 | V200R021C10SPC600 | - | SFU3–SFU8 | If the card is used in V200R021C01SPC600, install the patch of V200R021SPH022 or a later version. |
Indicators and Buttons
Figure 6-97 Indicators and buttons on the CE-SFU04F-A
![]()
1. Running status indicator |
2. OFL button |
3. Wrench removal button |
Table 6-237 Indicators on the CE-SFU04F-A
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN(G)/ALM(R)/OFL(Y) | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) |
Table 6-238 Buttons on the CE-SFU04F-A
| Silkscreen | Name | Description |
|---|---|---|
| OFL | OFL button | To remove an SFU, hold down the OFL button for 6s. You can remove the SFU until the running status indicator is steady yellow. |
| - | Wrench removal button | The SFU is installed and removed using removable wrenches. To remove the wrenches from an SFU, press and hold the round button (marked by number 3 in the preceding figure) on the SFU. |
Functions and Features
Table 6-239 Functions and features of the CE-SFU04F-A
| Functions and Features | Description |
|---|---|
| Line-rate data switching | Six SFUs in a chassis constitute the switching core of the data plane and provide high-speed SerDes channels for LPUs. |
| Reliability | The device uses a single-stage multi-plane switch fabric to expand the switching capacity. The system has N+1 switching planes, which work in load balancing and redundancy mode to ensure nonstop service data switching. |
| Restrictions and remarks | In the same chassis, the SFU cannot be installed together with an SFU of a different model. |
Technical Specifications
Table 6-240 Technical specifications of the CE-SFU04F-A
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 316.5 mm x 42.4 mm x 233.6 mm (12.46 in. x 1.67 in. x 9.20 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 185 mm x 485 mm x 390 mm (7.28 in. x 19.09 in. x 15.35 in.) |
| Weight without packaging [kg (lb)] | 3.3 kg (7.28 lb) |
| Weight with packaging [kg (lb)] | 4.7 kg (10.36 lb) |
| Typical power consumption [W] | 98 W |
| Typical heat dissipation [BTU/hour] | 335 BTU/hour |
| Static power consumption [W] | 88 W |
| Static heat dissipation [BTU/hour] | 300 BTU/hour |
| Maximum power consumption [W] | 119 W |
| Maximum heat dissipation [BTU/hour] | 406 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 2 GB |
| NOR Flash | Standard 128 MB |