Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CE-SFU16G-A (CE16816 Switch Fabric Unit G-A)
Overview
Table 6-367 Basic information about the CE-SFU16G-A
| Item | Details |
|---|---|
| Description | CE16816 Switch Fabric Unit G-A |
| Part Number | 03050EQJ |
| Model | CE-SFU16G-A |
| Silkscreen | CE-SFU16G-A |
Appearance
Figure 6-140 Appearance of the CE-SFU16G-A
![]()
The blue label on the left side of this card is a mixed-card prevention label. The color of mixed-card prevention labels on SFUs and LPUs to be installed on one device must be the same. Otherwise, the device will be damaged.
Version Mapping
Table 6-368 Mappings between CE-SFU16G-A and product
| Product | First Supported Version | Unsupported Model | IDs of available slots | Limitations |
|---|---|---|---|---|
| CloudEngine 16816 | V200R021C10SPC600 | - | SFU3–SFU8 | - |
Indicators and Buttons
Figure 6-141 Indicators and buttons on the CE-SFU16G-A
![]()
1. Running status indicator |
2. OFL button |
3. Wrench removal button |
Table 6-369 Indicators on the CE-SFU16G-A
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN(G)/ALM(R)/OFL(Y) | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical hardware alarm). | ||
| Yellow | Steady on | The card is not powered on. For example, the card has been forcibly powered off using the power off command or is in the pre-startup state. |
Table 6-370 Buttons on the CE-SFU16G-A
| Silkscreen | Name | Description |
|---|---|---|
| OFL | OFL button | To remove an SFU, press and hold down the OFL button for 6s. You can remove the SFU until the running status indicator is steady yellow. |
| - | Wrench removal button | Supports removable wrenches. To remove the wrenches from an SFU, press and hold down the round button (marked by number 3 in the preceding figure) on the SFU. |
Functions and Features
Table 6-371 Functions and features of the CE-SFU16G-A
| Functions and Features | Description |
|---|---|
| Line-rate data switching | Six SFUs form the switching core of the data plane and provide high-speed Serdes channels for LPUs. |
| Reliability | The device uses a single-stage multi-plane switch fabric to expand the switching capacity. The device has N+1 switching planes, which work in load balancing and redundancy mode to ensure nonstop service data switching. |
| Restrictions and remarks | This SFU cannot be installed with the SFUs of other models in the same chassis. |
Technical Specifications
Table 6-372 Technical specifications of the CE-SFU16G-A
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 1116.2 mm x 42.4 mm x 389.2 mm (43.94 in. x 1.67 in. x 15.32 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 285 mm x 1290 mm x 740 mm (11.22 in. x 50.79 in. x 29.13 in.) |
| Weight without packaging [kg (lb)] | 16.6 kg (36.60 lb) |
| Weight with packaging [kg (lb)] | 27.2 kg (59.97 lb) |
| Typical power consumption [W] | 541 W |
| Typical heat dissipation [BTU/hour] | 1846 BTU/hour |
| Static power consumption [W] | 397 W |
| Static heat dissipation [BTU/hour] | 1354 BTU/hour |
| Maximum power consumption [W] | 719 W |
| Maximum heat dissipation [BTU/hour] | 2453 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 2 GB |
| NOR Flash | Standard 128 MB |