No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
CloudEngine 16800 Series Switches Hardware Description (V200)
This document provides an overall description of the CE16800 series switches hardware, helping you obtain detailed information about each chassis, Power Supply System, Heat Dissipation System, card, cable, and pluggable modules for interface.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CE-SFU08F-G (03058883: CE16808 Switch Fabric Unit F)
Overview
Table 6-277 Basic information about the CE-SFU08F-G
Item
Details
Description
CE16808 Switch Fabric Unit F
Part Number
03058883
Model
CE-SFU08F-G
Silkscreen
CE-SFU08F-G
Appearance
Figure 6-110 Appearance of the CE-SFU08F-G
The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.
Version Mapping
Table 6-278 Mappings between CE-SFU08F-G and product
Product
First Supported Version
Unsupported Model
IDs of available slots
Limitations
CloudEngine 16808
V200R005C20
-
SFU3–SFU8
-
Indicators and Buttons
Figure 6-111 Indicators and buttons on the CE-SFU08F-G
1. Running status indicator
2. OFL button
3. Wrench removal button
Table 6-279 Indicators on the CE-SFU08F-G
Silkscreen
Name
Color
Status
Description
RUN(G)/ALM(R)/OFL(Y)
Running status indicator
Green
Steady on
The card has been powered on but the system software is not running.
Green
Slow blinking (0.5 Hz)
The card is working properly.
Green
Fast blinking (4 Hz)
The card is loading the system software or is resetting.
Red
Steady on
The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow
Steady on
The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
Table 6-280 Buttons on the CE-SFU08F-G
Silkscreen
Name
Description
OFL
OFL button
To remove an SFU, hold down the OFL button for 6s. You can remove the SFU until the running status indicator is steady yellow.
-
Wrench removal button
The SFU is installed and removed using removable wrenches. To remove the wrenches from an SFU, press and hold the round button (marked by number 3 in the preceding figure) on the SFU.
Functions and Features
Table 6-281 Functions and features of the CE-SFU08F-G
Functions and Features
Description
Line-rate data switching
Six SFUs in a chassis constitute the switching core of the data plane and provide high-speed SerDes channels for LPUs.
Reliability
The device uses a single-stage multi-plane switch fabric to expand the switching capacity. The device has N+1 switching planes, which work in load balancing and redundancy mode to ensure nonstop service data switching.
Restrictions and remarks
In the same chassis, the SFU cannot be installed together with an SFU of a different model.
Technical Specifications
Table 6-282 Technical specifications of the CE-SFU08F-G
Item
Specification
Dimensions without packaging (H x W x D) [mm (in.)]
559.9 mm x 42.4 mm x 233.6 mm (22.04 in. x 1.67 in. x 9.20 in.)
Dimensions with packaging (H x W x D) [mm (in.)]
220 mm x 780 mm x 385 mm (8.66 in. x 30.71 in. x 15.16 in.)
Weight without packaging [kg (lb)]
5.4 kg (11.91 lb)
Weight with packaging [kg (lb)]
9.3 kg (20.51 lb)
Typical power consumption [W]
105 W
Typical heat dissipation [BTU/hour]
359 BTU/hour
Static power consumption [W]
86 W
Static heat dissipation [BTU/hour]
294 BTU/hour
Maximum power consumption [W]
142 W
Maximum heat dissipation [BTU/hour]
485 BTU/hour
CPU
Quad-core, 1.4 GHz clock speed
Memory
Standard 2 GB
NOR Flash
Standard 128 MB
CE-SFU08F-G (03058883-002: CE16808 Switch Fabric Unit F)
Overview
Table 6-283 Basic information about the CE-SFU08F-G
Item
Details
Description
CE16808 Switch Fabric Unit F
Part Number
03058883-002
Model
CE-SFU08F-G
Silkscreen
CE-SFU08F-G
Appearance
Figure 6-112 Appearance of the CE-SFU08F-G
Version Mapping
Table 6-284 Mappings between CE-SFU08F-G and product
Product
First Supported Version
Unsupported Model
IDs of available slots
Limitations
CloudEngine 16808
V200R021C10SPC600
-
SFU3–SFU8
If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version.
Indicators and Buttons
Figure 6-113 Indicators and buttons on the CE-SFU08F-G
Table 6-285 Indicators on the CE-SFU08F-G
Silkscreen
Name
Color
Status
Description
RUN(G)/ALM(R)/OFL(Y)
Running status indicator
Green
Steady on
The card has been powered on but the system software is not running.
Green
Slow blinking (0.5 Hz)
The card is working properly.
Green
Fast blinking (4 Hz)
The card is loading the system software or is resetting.
Red
Steady on
The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow
Steady on
The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
Table 6-286 Buttons on the CE-SFU08F-G
Silkscreen
Name
Description
OFL
OFL button
To remove an SFU, hold down the OFL button for 6s. You can remove the SFU until the running status indicator is steady yellow.
-
Wrench removal button
The SFU is installed and removed using removable wrenches. To remove the wrenches from an SFU, press and hold the round button (marked by number 3 in the preceding figure) on the SFU.
Functions and Features
Table 6-287 Functions and features of the CE-SFU08F-G
Functions and Features
Description
Line-rate data switching
Six SFUs in a chassis constitute the switching core of the data plane and provide high-speed SerDes channels for LPUs.
Reliability
The device uses a single-stage multi-plane switch fabric to expand the switching capacity. The device has N+1 switching planes, which work in load balancing and redundancy mode to ensure nonstop service data switching.
Restrictions and remarks
In the same chassis, the SFU cannot be installed together with an SFU of a different model.
Technical Specifications
Table 6-288 Technical specifications of the CE-SFU08F-G
Item
Specification
Dimensions without packaging (H x W x D) [mm (in.)]
559.9 mm x 42.4 mm x 233.6 mm (22.04 in. x 1.67 in. x 9.20 in.)
Dimensions with packaging (H x W x D) [mm (in.)]
220 mm x 780 mm x 385 mm (8.66 in. x 30.71 in. x 15.16 in.)
