Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAN-960SA-B (FAN-960SA-B Fan Module)
Overview
Table 5-11 Basic information about the FAN-960SA-B
| Item | Details |
|---|---|
| Description | FAN-960SA-B Fan Module |
| Part Number | 02122582 |
| Model | FAN-960SA-B |
Appearance
The FAN-960SA-B fan module consists of a fan tray, fans, and a Fan Monitoring Unit (FMU). Figure 5-7 shows the appearance of the FAN-960SA-B fan module.
Version Mapping
Table 5-12 Mappings between FAN-960SA-B and product
| Product | First Supported Version | Unsupported Model | Limitations | IDs of available slots |
|---|---|---|---|---|
| CloudEngine 16816 | V200R005C20 | - | - | FAN1 to FAN3 |
Panel
Figure 5-8 Panel of the FAN-960SA-B
![]()
1. Captive screw |
2. Status indicators |
3. Handle |
4. Air exhaust vent |
Table 5-13 Indicators on the FAN-960SA-B
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| - | Fan status indicator | Green | Fast blinking (4 Hz) | The fan module has not established communication with the MPU or communication loss occurs. |
| Green | Slow blinking (0.5 Hz) | The fan module is working and communicating with the MPU properly. | ||
| Red | Slow blinking (0.5 Hz) | An alarm is generated, and the fan module is faulty. | ||
| Yellow | Steady on | The fan module is abnormal. The possible cause is that the software of the FMU on the fan module is abnormal or the fan module fails. | ||
| SFU | SFU status indicator | Green | Steady on | The SFU is working properly. |
| Red | Steady on | A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. | ||
| Yellow | Steady on | The fan module software is not loaded, or the communication fails, and the SFU indicator cannot be properly displayed. |
Functions and Features
Table 5-14 Functions and features of the FAN-960SA-B
| Functions and Features | Description |
|---|---|
| Basic function | The fan module dissipates heat for the chassis so that the chassis can work properly and efficiently within the operating temperature range. |
| Noise reduction | When the fan module is powered on, it rotates at 48% of the full speed for at most 5 minutes. After the fan module communicates with the MPU normally, the MPU controls running of the fan module. |
| Automatic fan speed adjustment | After the fan module communicates with the MPU normally, the MPU controls the speed of the fan module according to temperature of cards in the chassis. |
| Alarm report | The fan module can report alarms on fan module failures and communication failures. |
| Electronic label | The MPU reads and loads the electronic label of the fan module through RS485. |
| Hot swapping | Supported |
Technical Specifications
Table 5-15 Technical specifications of the FAN-960SA-B
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 1193 mm x 129 mm x 143 mm (46.97 in. x 5.08 in. x 5.63 in.) |
| Weight without packaging [kg (lb)] | 10.4 kg (22.93 lb) |
| Number of fans | 8 |
| Typical power consumption | 72 |
| Maximum power consumption [W] | 720 W |
| Maximum airflow [CFM] | 2320 CFM |
| Maximum wind pressure [Pa] | 652.8 Pa |