CEL36CQFD-A (36-port 100GE interface card (FD-A, QSFP28))

CloudEngine 16800 Series Switches Hardware Description (V200)

This document provides an overall description of the CE16800 series switches hardware, helping you obtain detailed information about each chassis, Power Supply System, Heat Dissipation System, card, cable, and pluggable modules for interface.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

CEL36CQFD-A (36-port 100GE interface card (FD-A, QSFP28))

CEL36CQFD-A (03050EPY: 36-port 100GE interface card (FD-A, QSFP28))
CEL36CQFD-A (03050EPY-001: 36-port 100GE interface card (FD-A, QSFP28))

CEL36CQFD-A (03050EPY: 36-port 100GE interface card (FD-A, QSFP28))

Overview

Table 6-698 Basic information about the CEL36CQFD-A

Item	Details
Description	36-port 100GE interface card (FD-A, QSFP28)
Part Number	03050EPY
Model	CEL36CQFD-A
Silkscreen	CEL36CQFD-A

Appearance

Figure 6-286 Appearance of the CEL36CQFD-A

The blue labels on the left and right ejector levers are mixed-card prevention labels. The color of mixed-card prevention labels on SFUs and LPUs to be installed on one device must be the same. Otherwise, the device will be damaged.

Version Mapping

Table 6-699 Mappings between CEL36CQFD-A and product

Product	First Supported Version	Unsupported Model	IDs of available slots	Limitations
CloudEngine 16804	V200R021C10SPC600	-	1–4	-
CloudEngine 16808	V200R021C10SPC600	-	1–8	-
CloudEngine 16816	V200R021C10SPC600	-	1–16	-

Indicators and Buttons

Figure 6-287 Indicators and buttons on the CEL36CQFD-A

1. Running status indicator

2. Port status indicator

3. 10GE/25GE port sequence number indicators

4. Button for manually controlling 10GE/25GE port sequence number indicators

Table 6-700 Indicators on the CEL36CQFD-A

Silkscreen	Name	Color	Status	Description
RUN/ALM	Running status indicator	Green	Steady on	The card has been powered on but the system software is not running.
		Green	Slow blinking (0.5 Hz)	The card is working properly.
		Green	Fast blinking (4 Hz)	The card is loading the system software or is resetting.
		Red	Steady on	The card has a fault that affects services and cannot be rectified automatically (critical hardware alarm).
		Yellow	Steady on	The card is not powered on. For example, the card has been forcibly powered off using the power off command or is in the pre-startup state.
-	Port status indicators Each port has a single-color indicator. The indicator with an upward arrow indicates the status of the top-row port, and the indicator with a downward arrow indicates the status of the bottom-row port.	Green	Steady on	The link on the port is connected.
-		Green	Blinking	The port is transmitting or receiving data.
-	10GE/25GE port sequence number indicators (1, 2, 3, 4)	Green	-	When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports. When the sequence number indicator N (N can be 1, 2, 3, or 4) of a converted 10GE/25GE port is on, the port indicator shows the status of the Nth converted 10GE/25GE port. Sequence number indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s. This is the default automatic mode. You can also press the 40/100GE Breakout button to manually control a specific port sequence number indicator. If a 40GE or 100GE port is not split, the port indicator still shows the status of the port.

Table 6-701 Buttons on the CEL36CQFD-A

Silkscreen	Name	Description
40/100GE Breakout	Button for manually controlling 10GE/25GE port sequence number indicators	When one or more 40GE or 100GE ports are split, the sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button.

Ports

Figure 6-288 Ports on the CEL36CQFD-A

1. Thirty-six 100GE optical ports

Table 6-702 Ports on the CEL36CQFD-A

Port	Connector Type	Description	Available Components
Thirty-six 100GE optical ports	QSFP28/QSFP+	Port for inputting and outputting 100GE/40GE optical signals	40GE QSFP+ optical modules 100GE QSFP28 optical modules QSFP+ to QSFP+ AOC cable QSFP28 to QSFP28 AOC cable QSFP+ to 4SFP+ AOC cable QSFP+ to QSFP+ high-speed cable QSFP+ to 4SFP+ high-speed cable QSFP28 to QSFP28 high-speed cable QSFP28 to 4SFP28 high-speed cable NOTE: When QSFP28 to QSFP28 or QSFP28 to 4SFP28 high-speed cables are used on a card, only 1 m high-speed cables are supported.

Functions and Features

Table 6-703 Functions and features of the CEL36CQFD-A

Functions and Features	Description
Basic function	The card provides data packet processing and traffic management on 36 100GE optical ports, which can be used as 36 40GE optical ports or split into 144 25GE or 144 10GE optical ports.
Maximum port density	All LPUs are of this model: The CloudEngine 16804 chassis provides a maximum of 144 100GE ports. The CloudEngine 16808 chassis provides a maximum of 288 100GE ports. The CloudEngine 16816 chassis provides a maximum of 576 100GE ports.
100GE port	Supports QSFP28 and QSFP+ optical modules. 100GE ports can work as 40GE ports through auto-sensing or be split into four 25GE or 10GE ports. Provides up to 36 x 40GE, 144 x 25GE, or 144 x 10GE ports. The 36 optical ports are independent, and each can work as a 40GE port or be split into four 25GE or 10GE ports.
Hot swapping	Supported

Technical Specifications

Table 6-704 Technical specifications of the CEL36CQFD-A

Item	Specification
Dimensions without packaging (H x W x D) [mm (in.)]	55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.)
Dimensions with packaging (H x W x D) [mm (in.)]	225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)]	9.2 kg (20.28 lb)
Weight with packaging [kg (lb)]	12.9 kg (28.44 lb)
Typical power consumption [W]	584 W
Typical heat dissipation [BTU/hour]	1993 BTU/hour
Static power consumption [W]	494 W
Static heat dissipation [BTU/hour]	1686 BTU/hour
Maximum power consumption [W]	948 W
Maximum heat dissipation [BTU/hour]	3235 BTU/hour
CPU	Eight-core, 1.5 GHz clock speed
Memory	Standard 8 GB
NOR Flash	Standard 64 MB