USB-to-Ethernet Cable
This section describes the structure and technical specifications of the USB-to-Ethernet cable.
Overview
One end of a USB-to-Ethernet cable is a USB port used to connect to a client, and the other end is split into two RJ45 connectors used to connect to routers. The two RJ45 connectors include one standard console port and one non-standard console port. Pin assignment for the two ports is different. For details, see Table 7-11.
Appearance
Pin Assignment
Cable |
Relation |
Color |
Description |
Start Pin |
Converter |
End Pin |
Description |
Color |
Relation |
Cable |
|---|---|---|---|---|---|---|---|---|---|---|
|
Pair |
White |
+5V DC |
X1.1 |
USB to RS232 conversion |
X2.6 |
RS232_RX |
Blue |
Pair |
|
Blue |
Data- |
X1.2 |
X2.3 |
RS232_TX |
White |
|||||
Pair |
Orange |
Data+ |
X1.3 |
X2.5 |
GND |
Orange |
- |
|||
White |
GND |
X1.4 |
X3.5 |
RS232_RX |
Blue |
Pair |
|
|||
- |
- |
- |
- |
- |
X3.8 |
RS232_TX |
White |
|||
- |
- |
- |
- |
- |
X3.4 |
GND |
Orange |
- |
Technical Specifications
Part Number |
Model |
Description |
Connector X1 |
Connector X2 |
Length |
Number of Cores |
Fire Rating |
|---|---|---|---|---|---|---|---|
04071851 |
- |
Signal Cable,USB-to-Ethernet cable,1.5m,USB-A(Male),CC2P0.48B(S),2*MP8-II |
USB-A(Male) |
MP8-II |
1.5 m |
- |
- |
- To use the USB-to-Ethernet serial cable, download the driver from the website and configure the driver as required. Download the driver from http://www.wch-ic.com/search?q=CH340&t=downloads.
- The device uses the W1 cable number and the cable label is RS232.