Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CE-SFU16G-GK (CE16816 Switch Fabric Unit GK)
Overview
Table 5-113 Basic information about the CE-SFU16G-GK
| Item | Details |
|---|---|
| Description | CE16816 Switch Fabric Unit GK |
| Silkscreen | CE-SFU16G-GK |
| Part Number | 03059632 |
| Model | CE-SFU16G-GK |
Appearance
Figure 5-47 Appearance of the CE-SFU16G-GK
![]()
Version Mapping
Table 5-114 Mappings between CE-SFU16G-GK and product sub-series
| Product Sub-Series | First Supported Version | Last Supported Version | Unsupported Version | Unsupported Model | Limitations | IDs of available slots |
|---|---|---|---|---|---|---|
| CloudEngine 16816 | V200R019C10 | - | V300R020C00 | - | - | SFU3-SFU8 |
Indicators and Buttons
Figure 5-48 Indicators and buttons on the CE-SFU16G-GK
![]()
1. Running status indicator |
2. OFL button |
3. Wrench removal button |
Table 5-115 Indicators on the CE-SFU16G-GK
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN(G)/ALM(R)/OFL(Y) | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) |
Table 5-116 Buttons on the CE-SFU16G-GK
| Silkscreen | Name | Description |
|---|---|---|
| OFL | OFL button | To remove an SFU, hold down the OFL button for 6s. You can remove the SFU until the running status indicator is steady yellow. |
| - | Wrench removal button | The SFU is installed and removed using removable wrenches. To remove the wrenches from an SFU, press and hold the round button (marked by number 3 in the preceding figure) on the SFU. |
Functions and Features
Table 5-117 Functions and features of the CE-SFU16G-GK
| Functions and Features | Description |
|---|---|
| Line-rate data switching | Six SFU cards in a chassis constitute the switching core of the data plane and provide high-speed SerDes channels for LPUs. |
| Reliability | The device uses a single-stage multi-plane switch fabric to expand the switching capacity. The planes work in load balancing and redundancy mode to ensure nonstop service data switching. |
| Restrictions and remarks | In the same chassis, the SFU cannot be installed together with an SFU of a different model. |
Technical Specifications
Table 5-118 Technical specifications of the CE-SFU16G-GK
| Item | Details |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 1116.2 mm x 42.4 mm x 389.2 mm (43.94 in. x 1.67 in. x 15.32 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 285 mm x 1290 mm x 740 mm (11.22 in. x 50.79 in. x 29.13 in.) |
| Weight without packaging [kg (lb)] | 21.7 kg (49.40 lb) |
| Weight with packaging [kg (lb)] | 30.6 kg (67.47 lb) |
| Typical power consumption [W] | 524 W |
| Typical heat dissipation [BTU/hour] | 1789 BTU/hour |
| Static power consumption [W] | 450 W |
| Static heat dissipation [BTU/hour] | 1537 BTU/hour |
| Maximum power consumption [W] | 661 W |
| Maximum heat dissipation [BTU/hour] | 2257 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 2 GB |
| Flash memory | Standard 128 MB |
