Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CloudEngine 16808 Chassis Door
Overview
The chassis door is optional and is installed at the front side of the chassis. It is used to shield electromagnetic noise and can protect the air intake vents of MPUs and LPUs from dust.
- Install a door on a chassis when the chassis is installed in a dusty environment or a cabinet without doors.
- A chassis door must be configured for a device that complies with FCC standards.
Table 5-19 Basic attributes of the CloudEngine 16808 chassis door
Item |
Details |
|---|---|
Description |
Chassis door |
Part number |
02352TPL |
Appearance
Figure 5-11 Appearance of the CloudEngine 16808 chassis door
![]()
Version Mapping
Table 5-20 Chassis and version matching the CloudEngine 16808 chassis door
Chassis |
First Supported Version |
|---|---|
CloudEngine 16808 |
V200R005C20 |
Components
Figure 5-12 Structure of the CloudEngine 16808 chassis door
![]()
Table 5-21 Components
1. Chassis door body |
2. Upper enclosure frame |
3. Lower enclosure frame |
4. Cable management frame (including the rubber part) |
5. Release button |