Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CEL18CQFD-GK (18-port 100GE interface card (FD-GK, QSFP28))
Overview
Table 5-186 Basic information about the CEL18CQFD-GK
| Item | Details |
|---|---|
| Description | 18-port 100GE interface card (FD-GK, QSFP28) |
| Silkscreen | CEL18CQFD-GK |
| Part Number | 03059591 |
| Model | CEL18CQFD-GK |
Appearance
Figure 5-79 Appearance of the CEL18CQFD-GK
![]()
Version Mapping
Table 5-187 Mappings between CEL18CQFD-GK and product sub-series
| Product Sub-Series | First Supported Version | Last Supported Version | Unsupported Version | Unsupported Model | Limitations | IDs of available slots |
|---|---|---|---|---|---|---|
| CloudEngine 16816 | V200R019C10 | - | V300R020C00 | - | - | 1-16 |
| CloudEngine 16804 | V200R019C10 | - | V300R020C00 | - | - | 1-4 |
| CloudEngine 16808 | V200R019C10 | - | V300R020C00 | - | - | 1-8 |
Indicators and Buttons
Figure 5-80 Indicators and buttons on the CEL18CQFD-GK
![]()
1. Running status indicator |
2. Port status indicator |
3. 10GE/25GE port sequence number indicators |
4. Button for manually controlling 10GE/25GE port sequence number indicators |
Table 5-188 Indicators on the CEL18CQFD-GK
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| RUN/ALM | Running status indicator | Green | Steady on | The card has been powered on but the system software is not running. |
| Green | Slow blinking (0.5 Hz) | The card is working properly. | ||
| Green | Fast blinking (4 Hz) | The card is loading the system software or is resetting. | ||
| Red | Steady on | The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware). | ||
| Yellow | Steady on | The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.) | ||
| - |
Port status indicator One single-color indicator for each port The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom. |
Green | Steady on | The link on the port is connected. |
| Green | Blinking | The port is transmitting or receiving data. | ||
| - | 10GE/25GE port sequence number indicators (1, 2, 3, 4) | Green | - |
When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports.
|
Table 5-189 Buttons on the CEL18CQFD-GK
| Silkscreen | Name | Description |
|---|---|---|
| 40/100GE Breakout | Button for manually controlling 10GE/25GE port sequence number indicators | When one or more 100GE ports are split into 10GE or 25GE ports, these sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the 10GE/25GE port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button. |
Ports
Figure 5-81 Ports on the CEL18CQFD-GK
![]()
1. Eighteen 100GE optical ports |
Table 5-190 Ports on the CEL18CQFD-GK
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 18 x 100GE optical ports | QSFP28/QSFP+ | Port for inputting and outputting 100GE/40GE optical signals |
Functions and Features
Table 5-191 Functions and features of the CEL18CQFD-GK
| Functions and Features | Description |
|---|---|
| Basic function | The CEL18CQFD-GK provides data packet processing and traffic management on 18 100GE optical ports, which can be used as 18 40GE optical ports or split into 72 25GE or 72 10GE optical ports. |
| Maximum port density |
If all LPUs are CEL18CQFD-GK cards:
|
| 100GE port |
100GE ports on the CEL18CQFD-GK support QSFP28 and QSFP+ optical modules. A 100GE port can be used as a 40GE port or split into four 25GE or four 10GE ports. That is, the CEL18CQFD-GK can provide a maximum of 18 40GE ports, 72 25GE ports, or 72 10GE ports. All the 18 100GE ports are independent, and each can be configured as one 40GE port, four 25GE ports, or four 10GE ports. |
Technical Specifications
Table 5-192 Technical specifications of the CEL18CQFD-GK
| Item | Details |
|---|---|
| Dimensions without packaging (H x W x D) [mm (in.)] | 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.) |
| Dimensions with packaging (H x W x D) [mm (in.)] | 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.) |
| Weight without packaging [kg (lb)] | 7.6 kg (16.76 lb) |
| Weight with packaging [kg (lb)] | 12.5 kg (27.56 lb) |
| Typical power consumption [W] | 251 W |
| Typical heat dissipation [BTU/hour] | 857 BTU/hour |
| Static power consumption [W] | 150 W |
| Static heat dissipation [BTU/hour] | 512 BTU/hour |
| Maximum power consumption [W] | 388 W |
| Maximum heat dissipation [BTU/hour] | 1325 BTU/hour |
| CPU | Quad-core, 1.4 GHz clock speed |
| Memory | Standard 4 GB |
| Flash memory | Standard 128 MB |
