Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QSFP-40G-SR-BD
Table 8-58 QSFP-40G-SR-BD specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-SR-BD |
| Part Number | 02311FPA |
| Model | QSFP-40G-SR-BD |
| Form factor | QSFP+ |
| Application standard/Type | 40GBASE-BIDI |
| Connector type | LC |
| Optical fiber type | MMF |
| Type of the end face of the fiber ceramic ferrule | PC or UPC |
| Working case temperature [°C (°F)] | 10°C to 70°C (50°F to 158°F) |
| DDM options | Not Supported |
| Transmission rate [bit/s] | 40Gbit/s |
| Target transmission distance [km] | Multimode fiber (OM3) (with diameter of 50 μm): 100 m Multimode fiber (OM4) (with diameter of 50 μm): 150 m |
| Modal bandwidth [MHz*km] | Multimode fiber (OM3): 2000 MHz*km Multimode fiber (OM4): 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm, 900 nm |
| Maximum Tx optical power (AVG) [dBm] | 5 dBm |
| Minimum Tx optical power (AVG) [dBm] | -4 dBm |
| Minimum extinction ratio [dB] | 4.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (OMA) [dBm] | -4.5 dBm |
| Overload power (AVG) [dBm] | 5 dBm |