CEL48XSFD-A (48-port 10GE interface card (FD-A, SFP+))

CloudEngine 16800 Series Switches Hardware Description (V200)

This document provides an overall description of the CE16800 series switches hardware, helping you obtain detailed information about each chassis, Power Supply System, Heat Dissipation System, card, cable, and pluggable modules for interface.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

CEL48XSFD-A (48-port 10GE interface card (FD-A, SFP+))

CEL48XSFD-A (03050ECA: 48-port 10GE interface card (FD-A, SFP+))
CEL48XSFD-A (03050ECA-001: 48-port 10GE interface card (FD-A, SFP+))

CEL48XSFD-A (03050ECA: 48-port 10GE interface card (FD-A, SFP+))

Overview

Table 6-427 Basic information about the CEL48XSFD-A

Item	Details
Description	48-port 10GE interface card (FD-A, SFP+)
Part Number	03050ECA
Model	CEL48XSFD-A
Silkscreen	CEL48XSFD-A

Appearance

Figure 6-169 Appearance of the CEL48XSFD-A

The blue labels on the left and right ejector levers are mixed-card prevention labels. The color of mixed-card prevention labels on SFUs and LPUs to be installed on one device must be the same. Otherwise, the device will be damaged.

Version Mapping

Table 6-428 Mappings between CEL48XSFD-A and product

Product	First Supported Version	Unsupported Model	IDs of available slots	Limitations
CloudEngine 16804	V200R021C00SPC100	-	1–4	-
CloudEngine 16808	V200R021C00SPC100	-	1–8	-
CloudEngine 16816	V200R021C10SPC600	-	1–16	-

Indicators

Figure 6-170 Indicators on the CEL48XSFD-A

1. Running status indicator

2. Port status indicator

Table 6-429 Indicators on the CEL48XSFD-A

Silkscreen	Name	Color	Status	Description
RUN/ALM	Running status indicator	Green	Steady on	The card has been powered on but the system software is not running.
		Green	Slow blinking (0.5 Hz)	The card is working properly.
		Green	Fast blinking (4 Hz)	The card is loading the system software or is resetting.
		Red	Steady on	The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
		Yellow	Steady on	The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
-	Port status indicator Two single-color indicators for each port Steady green: LINK indicator Blinking yellow: ACT indicator The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom.	Green	Steady on	The link on the port is connected.
		Green	Off	The link on the port is disconnected.
		Yellow	Fast blinking (15 Hz)	The port is transmitting or receiving data.
		Yellow	Off	The port is not transmitting or receiving data.

Ports

Figure 6-171 Ports on the CEL48XSFD-A

1. Forty-eight 10GE optical ports

Table 6-430 Ports on the CEL48XSFD-A

Port	Connector Type	Description	Available Components
48 x 10GE optical ports	SFP+/SFP	Port for inputting and outputting 10GE/GE optical signals	GE eSFP optical modules GE SFP copper modules 10GE SFP+ optical modules SFP+ to SFP+ AOC cable SFP+ to SFP+ high-speed cable

Functions and Features

Table 6-431 Functions and features of the CEL48XSFD-A

Functions and Features	Description
Basic function	The card provides data packet processing and traffic management on 48 10GE optical ports.
Maximum port density	If all LPUs are such cards: The CloudEngine 16804 chassis provides up to 192 x 10GE ports. The CloudEngine 16808 chassis provides up to 384 x 10GE ports. The CloudEngine 16816 chassis provides up to 768 x 10GE ports.
10GE port	When optical ports on the card work in 10GE mode, they support SFP+ 10GE optical modules, 10GE high-speed cables, and AOC cables. NOTE: 10GE optical ports 20 to 31 do not support auto-negotiation when they have GE optical modules installed. To such a port to a port on another device, disable auto-negotiation on the peer port. Otherwise, one port may go Up and the other may go Down. Other ports support 1000BASE-X auto-negotiation. 10GE optical ports 20 to 31 can only work at the rate of 1000 Mbit/s when they have copper modules installed.
Hot swapping	Supported

Technical Specifications

Table 6-432 Technical specifications of the CEL48XSFD-A

Item	Specification
Dimensions without packaging (H x W x D) [mm (in.)]	55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.)
Dimensions with packaging (H x W x D) [mm (in.)]	225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)]	6.9 kg (15.21 lb)
Weight with packaging [kg (lb)]	10.2 kg (22.49 lb)
Typical power consumption [W]	180 W
Typical heat dissipation [BTU/hour]	615 BTU/hour
Static power consumption [W]	112 W
Static heat dissipation [BTU/hour]	382 BTU/hour
Maximum power consumption [W]	242 W
Maximum heat dissipation [BTU/hour]	826 BTU/hour
CPU	Quad-core, 1.4 GHz clock speed
Memory	Standard 4 GB
NOR Flash	Standard 128 MB