Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power Switch
A switch controls the power output of power modules (PMs). The device has two switches that back up each other. When one or both switches are in the ON state, the power output of PMs is enabled.
Appearance
Figure 4-28 shows the appearance of the switches.
Panel
Table 4-25 Switch description
Name |
Description |
|---|---|
OFF/ON |
Controls device power-on and power-off. |
Functions
When one or both switches are turned on, the PMs output power, and the device is powered on. When both switches are turned off, the PMs do not output power, and the device is powered off.
Ensure that both switches are turned on when the device is running for reliability purposes.