No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Enterprise
Worldwide
Huawei Global - English
Search
Support Documentation
CloudEngine 16800 Series Switches Hardware Description (V200)

This document provides an overall description of the CE16800 series switches hardware, helping you obtain detailed information about each chassis, Power Supply System, Heat Dissipation System, card, cable, and pluggable modules for interface.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CEL18CQFD-G (18-Port 100GE Interface Card (FD-G, QSFP28))

CEL18CQFD-G (18-Port 100GE Interface Card (FD-G, QSFP28))

CEL18CQFD-G (03058870: 18-Port 100GE Interface Card (FD-G, QSFP28))

Overview

Table 6-579 Basic information about the CEL18CQFD-G
Item Details
Description 18-Port 100GE Interface Card (FD-G, QSFP28)
Part Number 03058870
Model CEL18CQFD-G
Silkscreen CEL18CQFD-G

Appearance

Figure 6-235 Appearance of the CEL18CQFD-G

The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.

Version Mapping

Table 6-580 Mappings between CEL18CQFD-G and product
Product First Supported Version Unsupported Model IDs of available slots Limitations
CloudEngine 16804 V200R005C20 - 1–4 -
CloudEngine 16808 V200R005C20 - 1–8 -
CloudEngine 16816 V200R005C20 - 1–16 -

Indicators and Buttons

Figure 6-236 Indicators and buttons on the CEL18CQFD-G

1. Running status indicator

2. Port status indicator

3. 10GE/25GE port sequence number indicators

4. Button for manually controlling 10GE/25GE port sequence number indicators
Table 6-581 Indicators on the CEL18CQFD-G
Silkscreen Name Color Status Description
RUN/ALM Running status indicator Green Steady on The card has been powered on but the system software is not running.
Green Slow blinking (0.5 Hz) The card is working properly.
Green Fast blinking (4 Hz) The card is loading the system software or is resetting.
Red Steady on The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow Steady on The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
-

Port status indicator

One single-color indicator for each port

The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom.

 Green Steady on The link on the port is connected.
Green Blinking The port is transmitting or receiving data.
- 10GE/25GE port sequence number indicators (1, 2, 3, 4) Green -

When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports.

  • If a port is split: When the sequence number indicator N (N can be 1, 2, 3, or 4) is on, the port indicator shows the status of the Nth 10GE or 25GE converted port. Sequence number indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s. This is the default automatic mode. You can also press the 40/100GE Breakout button to manually control a specific port sequence number indicator.
  • If a 40GE or 100GE port is not split, the port indicator shows the status of the 40GE or 100GE port.
Table 6-582 Buttons on the CEL18CQFD-G
Silkscreen Name Description
40/100GE Breakout Button for manually controlling 10GE/25GE port sequence number indicators When one or more 100GE ports are split into 10GE or 25GE ports, these sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the 10GE/25GE port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button.

Ports

Figure 6-237 Ports on the CEL18CQFD-G

1. Eighteen 100GE optical ports
Table 6-583 Ports on the CEL18CQFD-G
Port Connector Type Description Available Components
18 x 100GE optical ports QSFP28/QSFP+ Port for inputting and outputting 100GE/40GE optical signals
NOTE:

When a QSFP+ to QSFP+ high-speed cable is installed on the port, the cable can only be used as a stack cable or a cable that connects peer-link interfaces in an M-LAG.

Functions and Features

Table 6-584 Functions and features of the CEL18CQFD-G
Functions and Features Description
Basic function The card provides data packet processing and traffic management on 18 100GE optical ports, which can be used as 18 40GE optical ports or split into 72 25GE or 72 10GE optical ports.
Maximum port density

If all LPUs are these cards:

  • The CloudEngine 16804 chassis provides a maximum of 72 100GE ports.
  • The CloudEngine 16808 chassis provides a maximum of 144 100GE ports.
  • The CloudEngine 16816 chassis provides a maximum of 288 100GE ports.
100GE port

100GE ports on the card support QSFP28 and QSFP+ optical modules. A 100GE port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.

That is, a card can provide a maximum port density of 18 x 40GE, 72 x 25GE, or 72 x 10GE.

All the 18 100GE ports are independent, and each port can used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.
Hot swapping Supported

Technical Specifications

Table 6-585 Technical specifications of the CEL18CQFD-G
Item Specification
Dimensions without packaging (H x W x D) [mm (in.)] 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.)
Dimensions with packaging (H x W x D) [mm (in.)] 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)] 7.6 kg (16.76 lb)
Weight with packaging [kg (lb)] 12.5 kg (27.56 lb)
Typical power consumption [W] 251 W
Typical heat dissipation [BTU/hour] 857 BTU/hour
Static power consumption [W] 150 W
Static heat dissipation [BTU/hour] 512 BTU/hour
Maximum power consumption [W] 388 W
Maximum heat dissipation [BTU/hour] 1325 BTU/hour
CPU Quad-core, 1.4 GHz clock speed
Memory Standard 4 GB
NOR Flash Standard 128 MB

CEL18CQFD-G (03058870-001: 18-Port 100GE Interface Card (FD-G, QSFP28))

Overview

Table 6-586 Basic information about the CEL18CQFD-G
Item Details
Description 18-Port 100GE Interface Card (FD-G, QSFP28)
Part Number 03058870-001
Model CEL18CQFD-G
Silkscreen CEL18CQFD-G

Appearance

Figure 6-238 Appearance of the CEL18CQFD-G

The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.

Version Mapping

Table 6-587 Mappings between CEL18CQFD-G and product
Product First Supported Version Unsupported Model IDs of available slots Limitations
CloudEngine 16804 V200R020C10 - 1–4 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH007 or a later version.
CloudEngine 16808 V200R020C10 - 1–8 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH007 or a later version.
CloudEngine 16816 V200R020C10 - 1–16 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH007 or a later version.

Indicators and Buttons

Figure 6-239 Indicators and buttons on the CEL18CQFD-G

1. Running status indicator

2. Port status indicator

3. 10GE/25GE port sequence number indicators

4. Button for manually controlling 10GE/25GE port sequence number indicators
Table 6-588 Indicators on the CEL18CQFD-G
Silkscreen Name Color Status Description
RUN/ALM Running status indicator Green Steady on The card has been powered on but the system software is not running.
Green Slow blinking (0.5 Hz) The card is working properly.
Green Fast blinking (4 Hz) The card is loading the system software or is resetting.
Red Steady on The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow Steady on The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
-

Port status indicator

One single-color indicator for each port

The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom.

 Green Steady on The link on the port is connected.
Green Blinking The port is transmitting or receiving data.
- 10GE/25GE port sequence number indicators (1, 2, 3, 4) Green -

When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports.

  • If a port is split: When the sequence number indicator N (N can be 1, 2, 3, or 4) is on, the port indicator shows the status of the Nth 10GE or 25GE converted port. Sequence number indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s. This is the default automatic mode. You can also press the 40/100GE Breakout button to manually control a specific port sequence number indicator.
  • If a 40GE or 100GE port is not split, the port indicator shows the status of the 40GE or 100GE port.
Table 6-589 Buttons on the CEL18CQFD-G
Silkscreen Name Description
40/100GE Breakout Button for manually controlling 10GE/25GE port sequence number indicators When one or more 100GE ports are split into 10GE or 25GE ports, these sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the 10GE/25GE port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button.

Ports

Figure 6-240 Ports on the CEL18CQFD-G

1. Eighteen 100GE optical ports
Table 6-590 Ports on the CEL18CQFD-G
Port Connector Type Description Available Components
18 x 100GE optical ports QSFP28/QSFP+ Port for inputting and outputting 100GE/40GE optical signals
NOTE:

When a QSFP+ to QSFP+ high-speed cable is installed on the port, the cable can only be used as a stack cable or a cable that connects peer-link interfaces in an M-LAG.

Functions and Features

Table 6-591 Functions and features of the CEL18CQFD-G
Functions and Features Description
Basic function The card provides data packet processing and traffic management on 18 100GE optical ports, which can be used as 18 40GE optical ports or split into 72 25GE or 72 10GE optical ports.
Maximum port density

If all LPUs are these cards:

  • The CloudEngine 16804 chassis provides a maximum of 72 100GE ports.
  • The CloudEngine 16808 chassis provides a maximum of 144 100GE ports.
  • The CloudEngine 16816 chassis provides a maximum of 288 100GE ports.
100GE port

100GE ports on the card support QSFP28 and QSFP+ optical modules. A 100GE port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.

That is, a card can provide a maximum port density of 18 x 40GE, 72 x 25GE, or 72 x 10GE.

All the 18 100GE ports are independent, and each port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.
Hot swapping Supported

Technical Specifications

Table 6-592 Technical specifications of the CEL18CQFD-G
Item Specification
Dimensions without packaging (H x W x D) [mm (in.)] 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.)
Dimensions with packaging (H x W x D) [mm (in.)] 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)] 7.6 kg (16.76 lb)
Weight with packaging [kg (lb)] 12.5 kg (27.56 lb)
Typical power consumption [W] 251 W
Typical heat dissipation [BTU/hour] 857 BTU/hour
Static power consumption [W] 150 W
Static heat dissipation [BTU/hour] 512 BTU/hour
Maximum power consumption [W] 388 W
Maximum heat dissipation [BTU/hour] 1325 BTU/hour
CPU Quad-core, 1.4 GHz clock speed
Memory Standard 4 GB
NOR Flash Standard 128 MB

CEL18CQFD-G (03058870-002: 18-Port 100GE Interface Card (FD-G, QSFP28))

Overview

Table 6-593 Basic information about the CEL18CQFD-G
Item Details
Description 18-Port 100GE Interface Card (FD-G, QSFP28)
Part Number 03058870-002
Model CEL18CQFD-G
Silkscreen CEL18CQFD-G

Appearance

Figure 6-241 Appearance of the CEL18CQFD-G

The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.

Version Mapping

Table 6-594 Mappings between CEL18CQFD-G and product
Product First Supported Version Unsupported Model IDs of available slots Limitations
CloudEngine 16804 V200R021C10SPC600 - 1–4 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH032 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH010 or a later version.
CloudEngine 16808 V200R021C10SPC600 - 1–8 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH032 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH010 or a later version.
CloudEngine 16816 V200R021C10SPC600 - 1–16 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH032 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH010 or a later version.

Indicators and Buttons

Figure 6-242 Indicators and buttons on the CEL18CQFD-G

1. Running status indicator

2. Port status indicator

3. 10GE/25GE port sequence number indicators

4. Button for manually controlling 10GE/25GE port sequence number indicators
Table 6-595 Indicators on the CEL18CQFD-G
Silkscreen Name Color Status Description
RUN/ALM Running status indicator Green Steady on The card has been powered on but the system software is not running.
Green Slow blinking (0.5 Hz) The card is working properly.
Green Fast blinking (4 Hz) The card is loading the system software or is resetting.
Red Steady on The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow Steady on The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
-

Port status indicator

One single-color indicator for each port

The indicator with an up arrowhead shows the status of the port on the top, and the indicator with a down arrowhead shows the status of the port at the bottom.

 Green Steady on The link on the port is connected.
Green Blinking The port is transmitting or receiving data.
- 10GE/25GE port sequence number indicators (1, 2, 3, 4) Green -

When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports.

  • If a port is split: When the sequence number indicator N (N can be 1, 2, 3, or 4) is on, the port indicator shows the status of the Nth 10GE or 25GE converted port. Sequence number indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s. This is the default automatic mode. You can also press the 40/100GE Breakout button to manually control a specific port sequence number indicator.
  • If a 40GE or 100GE port is not split, the port indicator shows the status of the 40GE or 100GE port.
Table 6-596 Buttons on the CEL18CQFD-G
Silkscreen Name Description
40/100GE Breakout Button for manually controlling 10GE/25GE port sequence number indicators When one or more 100GE ports are split into 10GE or 25GE ports, these sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the 10GE/25GE port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button.

Ports

Figure 6-243 Ports on the CEL18CQFD-G

1. Eighteen 100GE optical ports
Table 6-597 Ports on the CEL18CQFD-G
Port Connector Type Description Available Components
18 x 100GE optical ports QSFP28/QSFP+ Port for inputting and outputting 100GE/40GE optical signals
NOTE:

When a QSFP+ to QSFP+ high-speed cable is installed on the port, the cable can only be used as a stack cable or a cable that connects peer-link interfaces in an M-LAG.

Functions and Features

Table 6-598 Functions and features of the CEL18CQFD-G
Functions and Features Description
Basic function The card provides data packet processing and traffic management on 18 100GE optical ports, which can be used as 18 40GE optical ports or split into 72 25GE or 72 10GE optical ports.
Maximum port density

If all LPUs are these cards:

  • The CloudEngine 16804 chassis provides a maximum of 72 100GE ports.
  • The CloudEngine 16808 chassis provides a maximum of 144 100GE ports.
  • The CloudEngine 16816 chassis provides a maximum of 288 100GE ports.
100GE port

100GE ports on the card support QSFP28 and QSFP+ optical modules. A 100GE port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.

That is, a card can provide a maximum port density of 18 x 40GE, 72 x 25GE, or 72 x 10GE.

All the 18 100GE ports are independent, and each port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.
Hot swapping Supported

Technical Specifications

Table 6-599 Technical specifications of the CEL18CQFD-G
Item Specification
Dimensions without packaging (H x W x D) [mm (in.)] 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.)
Dimensions with packaging (H x W x D) [mm (in.)] 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)] 7.6 kg (16.76 lb)
Weight with packaging [kg (lb)] 12.5 kg (27.56 lb)
Typical power consumption [W] 251 W
Typical heat dissipation [BTU/hour] 857 BTU/hour
Static power consumption [W] 150 W
Static heat dissipation [BTU/hour] 512 BTU/hour
Maximum power consumption [W] 388 W
Maximum heat dissipation [BTU/hour] 1325 BTU/hour
CPU Quad-core, 1.4 GHz clock speed
Memory Standard 4 GB
NOR Flash Standard 128 MB

CEL18CQFD-G (03058870-003: 18-Port 100GE Interface Card (FD-G, QSFP28))

Overview

Table 6-600 Basic information about the CEL18CQFD-G
Item Details
Description 18-Port 100GE Interface Card (FD-G, QSFP28)
Part Number 03058870-003
Model CEL18CQFD-G
Silkscreen CEL18CQFD-G

Appearance

Figure 6-244 Appearance of the CEL18CQFD-G

The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.

Version Mapping

Table 6-601 Mappings between CEL18CQFD-G and product
Product First Supported Version Unsupported Model IDs of available slots Limitations
CloudEngine 16804 V200R021C10SPC600 - 1–4 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version.
CloudEngine 16808 V200R021C10SPC600 - 1–8 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version.
CloudEngine 16816 V200R021C10SPC600 - 1–16 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH020 or a later version.

Indicators and Buttons

Figure 6-245 Indicators and buttons on the CEL18CQFD-G

1. Running status indicator

2. Port status indicator

3. 10GE/25GE port sequence number indicators

4. Button for manually controlling 10GE/25GE port sequence number indicators
Table 6-602 Indicators on the CEL18CQFD-G
Silkscreen Name Color Status Description
RUN/ALM Running status indicator Green Steady on The card has been powered on but the system software is not running.
Green Slow blinking (0.5 Hz) The card is working properly.
Green Fast blinking (4 Hz) The card is loading the system software or is resetting.
Red Steady on The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow Steady on The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
-

Port status indicator

One single-color indicator for each port

The indicator with an up arrowhead shows the status of a top-row port, and the indicator with a down arrowhead shows the status of a bottom-row port.

 Green Steady on A link has been established on the port.
Green Blinking The port is not transmitting or receiving data.
- 10GE/25GE port sequence number indicators (1, 2, 3, 4) Green -

When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports.

  • When the sequence number indicator N (N can be 1, 2, 3, or 4) of a converted 10GE/25GE port is on, the port indicator shows the status of the Nth converted 10GE/25GE port. Sequence number indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s. This is the default automatic mode. You can also press the 40/100GE Breakout button to manually control a specific port sequence number indicator.
  • If a 40GE or 100GE port is not split, the port indicator still shows the status of the port.
Table 6-603 Buttons on the CEL18CQFD-G
Silkscreen Name Description
40/100GE Breakout Button for manually controlling 10GE/25GE port sequence number indicators When one or more 100GE ports are split, the sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button.

Ports

Figure 6-246 Ports on the CEL18CQFD-G

1. Eighteen 100GE optical ports
Table 6-604 Ports on the CEL18CQFD-G
Port Connector Type Description Available Components
18 x 100GE optical ports QSFP28/QSFP+ Port for inputting and outputting 100GE/40GE optical signals
NOTE:

When a QSFP+ to QSFP+ high-speed cable is installed on the port, the cable can only be used as a stack cable or a cable that connects peer-link interfaces in an M-LAG.

Functions and Features

Table 6-605 Functions and features of the CEL18CQFD-G
Functions and Features Description
Basic function Provides data packet processing and traffic management on 18 x 100GE optical ports, which can be used as 18 x 40GE optical ports or split into 72 x 25GE or 72 x 10GE optical ports.
Maximum port density

If all LPUs are such cards:

  • The CloudEngine 16804 chassis provides up to 72 x 100GE ports.
  • The CloudEngine 16808 chassis provides up to 144 x 100GE ports.
  • The CloudEngine 16816 chassis provides up to 288 x 100GE ports.
100GE port

QSFP28 and QSFP+ optical modules are supported. A 100GE port on the card can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.

The card can provide a maximum port density of 18 x 40GE, 72 x 25GE, or 72 x 10GE.

All the 18 optical ports are independent, and each 100GE port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.
Hot swapping Supported

Technical Specifications

Table 6-606 Technical specifications of the CEL18CQFD-G
Item Specification
Dimensions without packaging (H x W x D) [mm (in.)] 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.6 in.)
Dimensions with packaging (H x W x D) [mm (in.)] 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)] 7.6 kg (16.75 lb)
Weight with packaging [kg (lb)] 12.5 kg (27.56 lb)
Typical power consumption [W] 251 W
Typical heat dissipation [BTU/hour] 857 BTU/hour
Static power consumption [W] 150 W
Static heat dissipation [BTU/hour] 512 BTU/hour
Maximum power consumption [W] 388 W
Maximum heat dissipation [BTU/hour] 1325 BTU/hour
CPU 4-core, 1.4 GHz clock speed
Memory Standard 4 GB
NOR Flash Standard 128 MB

CEL18CQFD-G (03058870-004: 18-Port 100GE Interface Card (FD-G, QSFP28))

Overview

Table 6-607 Basic information about the CEL18CQFD-G
Item Details
Description 18-Port 100GE Interface Card (FD-G, QSFP28)
Part Number 03058870-004
Model CEL18CQFD-G
Silkscreen CEL18CQFD-G

Appearance

Figure 6-247 Appearance of the CEL18CQFD-G

The device where this card is to be installed cannot house SFUs or LPUs with mixed-card prevention labels. Otherwise, the device will be damaged.

Version Mapping

Table 6-608 Mappings between CEL18CQFD-G and product
Product First Supported Version Unsupported Model IDs of available slots Limitations
CloudEngine 16804 V200R021C10SPC600 - 1–4 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH022 or a later version.
CloudEngine 16808 V200R021C10SPC600 - 1–8 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH022 or a later version.
CloudEngine 16816 V200R021C10SPC600 - 1–16 If the card is used in V200R019C10SPC800, install the patch of V200R019SPH053 or a later version. If the card is used in V200R021C01SPC600, install the patch of V200R021SPH022 or a later version.

Indicators and Buttons

Figure 6-248 Indicators and buttons on the CEL18CQFD-G

1. Running status indicator

2. Port status indicator

3. 10GE/25GE port sequence number indicators

4. Button for manually controlling 10GE/25GE port sequence number indicators
Table 6-609 Indicators on the CEL18CQFD-G
Silkscreen Name Color Status Description
RUN/ALM Running status indicator Green Steady on The card has been powered on but the system software is not running.
Green Slow blinking (0.5 Hz) The card is working properly.
Green Fast blinking (4 Hz) The card is loading the system software or is resetting.
Red Steady on The card has a fault that affects services and cannot be rectified automatically (critical alarm about hardware).
Yellow Steady on The card is in power-off state. (For example, the card has been forcibly powered off using the power off command or is about to start.)
-

Port status indicator

One single-color indicator for each port

The indicator with an up arrowhead shows the status of a top-row port, and the indicator with a down arrowhead shows the status of a bottom-row port.

 Green Steady on A link has been established on the port.
Green Blinking The port is transmitting or receiving data.
- 10GE/25GE port sequence number indicators (1, 2, 3, 4) Green -

When one or more 40GE or 100GE ports are split, these sequence number indicators take effect. The sequence number indicators work with the port indicators to show the status of converted ports.

  • When the sequence number indicator N (N can be 1, 2, 3, or 4) of a converted 10GE/25GE port is on, the port indicator shows the status of the Nth converted 10GE/25GE port. Sequence number indicators 1, 2, 3, 4 turn on in cyclic order, with each indicator keeping on for 5s. This is the default automatic mode. You can also press the 40/100GE Breakout button to manually control a specific port sequence number indicator.
  • If a 40GE or 100GE port is not split, the port indicator still shows the status of the port.
Table 6-610 Buttons on the CEL18CQFD-G
Silkscreen Name Description
40/100GE Breakout Button for manually controlling 10GE/25GE port sequence number indicators When one or more 100GE ports are split, the sequence number indicators take effect. Press the 40/100GE Breakout button to turn on the port sequence number indicators cyclically. For example, if you press the 40/100GE Breakout button when indicator 3 is on, indicator 3 is still on. When you press the button a second time, indicator 4 turns on. Indicators 1 and 2 turn on in sequence when you press the 40/100GE Breakout button a third and fourth time. The manual control mode restores to the default automatic mode 60s after you stop pressing the 40/100GE Breakout button.

Ports

Figure 6-249 Ports on the CEL18CQFD-G

1. Eighteen 100GE optical ports
Table 6-611 Ports on the CEL18CQFD-G
Port Connector Type Description Available Components
18 x 100GE optical ports QSFP28/QSFP+ Port for inputting and outputting 100GE/40GE optical signals
NOTE:

When a QSFP+ to QSFP+ high-speed cable is installed on the port, the cable can only be used as a stack cable or a cable that connects peer-link interfaces in an M-LAG.

Functions and Features

Table 6-612 Functions and features of the CEL18CQFD-G
Functions and Features Description
Basic function Provides data packet processing and traffic management on 18 x 100GE optical ports, which can be used as 18 x 40GE optical ports or split into 72 x 25GE or 72 x 10GE optical ports.
Maximum port density

If all LPUs are such cards:

  • The CloudEngine 16804 chassis provides up to 72 x 100GE ports.
  • The CloudEngine 16808 chassis provides up to 144 x 100GE ports.
  • The CloudEngine 16816 chassis provides up to 288 x 100GE ports.
100GE port

QSFP28 and QSFP+ optical modules are supported. A 100GE port on the card can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.

The card can provide a maximum port density of 18 x 40GE, 72 x 25GE, or 72 x 10GE.

All the 18 optical ports are independent, and each 100GE port can be used as a 40GE port through auto-sensing, or split into four 25GE or four 10GE ports.
Hot swapping Supported

Technical Specifications

Table 6-613 Technical specifications of the CEL18CQFD-G
Item Specification
Dimensions without packaging (H x W x D) [mm (in.)] 55.4 mm x 433.0 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.6 in.)
Dimensions with packaging (H x W x D) [mm (in.)] 225 mm x 590 mm x 750 mm (8.86 in. x 23.23 in. x 29.53 in.)
Weight without packaging [kg (lb)] 7.6 kg (16.75 lb)
Weight with packaging [kg (lb)] 12.5 kg (27.56 lb)
Typical power consumption [W] 251 W
Typical heat dissipation [BTU/hour] 857 BTU/hour
Static power consumption [W] 150 W
Static heat dissipation [BTU/hour] 512 BTU/hour
Maximum power consumption [W] 388 W
Maximum heat dissipation [BTU/hour] 1325 BTU/hour
CPU 4-core, 1.4 GHz clock speed
Memory Standard 4 GB
NOR Flash Standard 128 MB
Translation
简体中文
Download
Updated: 2022-11-25

Document ID: EDOC1100095397

Views: 321805

Downloads: 1645

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :