Card Structure and Dimensions
Card Structure
Figure 6-4 shows components on a card.
1. Card name label |
2. Indicator |
3. Captive screw NOTE:
This component is used to fix a card into the chassis. |
4. Ejector lever NOTE:
Allow you to insert and remove the card. |
5. Front panel plate NOTE:
There are card name label, indicators, and ports on the plate, as well as some other labels, such as the bar code and laser label. |
6. Ports |
7. Printed circuit board (PCB) NOTE:
|
- |
- |
Card Dimensions
Figure 6-5 shows how the height, width, and depth of a card are measured.
The card dimensions are defined as follows:
- Height: the height of the front panel
- Width: the longest distance between the tops of two ejector levers
- Depth: height of the front panel of a card