Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical Configuration for Interconnection Between AC and Huawei Agile Controller-Campus Server
- Example for Configuring Wireless 802.1X Authentication
This section describes how to configure wireless 802.1X authentication for mobile terminals to access networks. - Example for Configuring Portal Authentication (Including MAC Address-Prioritized Portal Authentication) for Wireless Users
This example illustrates how to configure Portal authentication on a wireless network to ensure that only authenticated wireless terminals can connect to the network. - Example for Configuring Wireless MAC Address Authentication
This section describes how to configure wireless MAC address authentication for dumb terminals such as IP phones, printers, and cameras to access networks in wireless mode. - Example for Configuring Guests to Obtain Passwords Through Mobile Phones to Pass Authentication Quickly
Guests can obtain passwords through mobile phones to connect to networks quickly. - Example for Configuring Guests Connect to Networks by Scanning Public QR Codes
After guests connect to a Wi-Fi network using their mobile phones, they can scan QR codes posted in public areas for authentication to easily access a network. - Example for Configuring 802.1X Authentication for Wireless Users in a VRRP HSB Environment
The two-node cluster environment includes the AC (VRRP) and RADIUS server two-node clusters. Deploying two-node clusters on WLANs improve network reliability. - Example for Configuring Portal Authentication for Wireless Users in a VRRP HSB Environment
This example illustrates how to configure Portal authentication on a hot standby (HSB) wireless network. VRRP-enabled ACs, RADIUS servers, and Portal servers on the network are deployed in HSB mode, improving network reliability. - Example for Configuring Portal Authentication for Wireless Users in an AC Dual-Link Backup Environment
This example illustrates how to configure AC dual-link backup to improve network reliability. - Example for Configuring Portal Authentication for Wireless Users in an AC N+1 Environment
This example illustrates how to configure Portal authentication on an AC N+1 network. The RADIUS server and Portal server are both deployed in a two-node cluster, improving network access reliability. - Appendix