Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verification
- Run the display ap all command on AC_1 and AC_2 to check the current AP status. When the following information is displayed, the AP goes online successfully.
[AC_1] display ap all Total AP information: nor : normal [1] ExtraInfo : Extra information P : insufficient power supply ---------------------------------------------------------------------------------------------------- ID MAC Name Group IP Type State STA Uptime ExtraInfo ---------------------------------------------------------------------------------------------------- 0 60de-4476-e360 AP_1 wlan_net 10.128.1.254 AP6050DN nor 0 10S - ---------------------------------------------------------------------------------------------------- Total: 1
- Run the display hsb-service 0 command on AC_1 and AC_2 to check the HSB service status. When the Service State field displays Connected, an HSB channel has been established.
[AC_1] display hsb-service 0 Hot Standby Service Information: ---------------------------------------------------------- Local IP Address : 10.1.1.253 Peer IP Address : 10.1.1.254 Source Port : 10241 Destination Port : 10241 Keep Alive Times : 5 Keep Alive Interval : 3 Service State : Connected Service Batch Modules : Access-user Shared-key : - ----------------------------------------------------------
[AC_2] display hsb-service 0 Hot Standby Service Information: ---------------------------------------------------------- Local IP Address : 10.1.1.254 Peer IP Address : 10.1.1.253 Source Port : 10241 Destination Port : 10241 Keep Alive Times : 5 Keep Alive Interval : 3 Service State : Connected Service Batch Modules : Access-user Shared-key : - ----------------------------------------------------------
- Run the display hsb-group 0 command on AC_1 and AC_2 to check the HSB group status.
[AC_1] display hsb-group 0 Hot Standby Group Information: ---------------------------------------------------------- HSB-group ID : 0 Vrrp Group ID : 1 Vrrp Interface : Vlanif800 Service Index : 0 Group Vrrp Status : Master Group Status : Active Group Backup Process : Realtime Peer Group Device Name : AC6805 Peer Group Software Version : V200R010C00 Group Backup Modules : Access-user AP DHCP ----------------------------------------------------------[AC_2] display hsb-group 0 Hot Standby Group Information: ---------------------------------------------------------- HSB-group ID : 0 Vrrp Group ID : 1 Vrrp Interface : Vlanif800 Service Index : 0 Group Vrrp Status : Backup Group Status : Inactive Group Backup Process : Realtime Peer Group Device Name : AC6805 Peer Group Software Version : V200R010C00 Group Backup Modules : Access-user AP DHCP ---------------------------------------------------------- - Check whether a user can be authenticated using RADIUS authentication. (Test user test@huawei.com and password 123456 have been configured on the RADIUS server.)
[AC_1] test-aaa test@huawei.com 123456 radius-template radius_huawei Info: Account test succeed.
- After the configurations are complete, you can use a STA to successfully search for the WLAN with SSID name wlan_net. The STA obtains an IP address when you associate with the WLAN. When you open a browser, the authentication page provided by the Portal server is automatically displayed. After entering the correct user name test@huawei.com and password 123456 and being successfully authenticated, you can access the Internet.
- You can use roaming services through a mobile phone.