Location Profile

WLAN V200R019C00 Typical Configuration Examples

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

Location Profile

Overview

A location profile is used to enable the WLAN location function and configure location server parameters and the mode used by APs to report location information.

CLI-based Procedure

For details, see Wi-Fi Tag Location Configuration in the Configuration, Bluetooth Location Configuration in the Configuration and Terminal Location Configuration in the Configuration

Web-based Procedure

Log in to the web platform, and choose Configuration > AP Config > AP Group or Configuration > AP Config > AP Config. Click the AP group name or AP ID to access the AP group or AP configuration page.
Select Display all profiles. Choose WLAN Location > WLAN Location Profile. Select an existing profile or create a new one.
Access the profile page. Table 3-87 describes the parameters on this page.

Figure 3-107 WLAN Location Profile

Table 3-87 WLAN Location Profile

Item	Description
AeroScout Location
Tag location	AeroScout tag location function. By default, the function is disabled.
STA location	AeroScout MU location function. By default, the function is disabled.
Packet aggregation interval (100ms)	Interval of AeroScout tag location packet aggregation and MU packet aggregation. The value range is 0 to 65535. The default value is 65535.
Data report mode	Mode in which AeroScout location packets are reported. Through AC: The AP sends tag information to the AC, and the AC reports the information to the location server. The AC can collect statistics on the reported tag information, which is inefficient. AP: The AP directly reports tag information to the location server. The AC cannot collect tag information reported by APs, and therefore the report efficiency is high. NOTE: Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be specified only in one profile.
Server port number	Port number of the AeroScout location server.
AC port number	AC port number used to communicate with the AeroScout location server.
Ekahau Location
Tag location	Ekahau tag location function. By default, the function is disabled.
Data report mode	Mode in which Ekahau location packets are reported. Through AC: The AP sends tag information to the AC, and the AC reports the information to the location server. The AC can collect statistics on the reported tag information, which is inefficient. AP: The AP directly reports tag information to the location server. The AC cannot collect tag information reported by APs, and therefore the report efficiency is high. NOTE: Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.
Server IP/port number	IP address and port number of the Ekahau location server.
AC port number	AC port number used to communicate with the Ekahau location server.
Private Location
STA location	STA location function. By default, the function is disabled.
Data report interval (ms)	Interval for reporting STA location packets. The value range is 500 to 60000. The default value is 20000.
Protocol version	STA location protocol version. The options can be: V3: Indicates that the protocol version is Version 3. V5: Indicates that the protocol version is Version 5.
Data report mode	Mode in which STA location packets are reported. Through AC: The AP sends tag information to the AC, and the AC reports the information to the location server. The AC can collect statistics on the reported tag information, which is inefficient. AP: The AP directly reports tag information to the location server. The AC cannot collect tag information reported by APs, and therefore the report efficiency is high. NOTE: Each location profile defines three location methods: AeroScout location, Ekahau location, and private location. If multiple location profiles are used and the same location method is used, Through AC can be only specified in one profile.
Server connection	IP address/Domain mane and port number of the terminal location server.
AC port number	AC port number used to communicate with the STA location server.
Source IP address of outgoing packets	Source IP address in location packets reported by the AC to the location server.
Protocol type	Protocol type used by APs to report information.
SSL policy	SSL policy name. If wireless configuration synchronization is enabled, ensure that the same SSL policy is configured on the master and backup ACs.
Wireless Device Location Data
Wireless location collection	Whether to enable the function of collecting wireless device location data. By default, the function is disabled.
RSSI threshold for collecting location data (dBm)	After the function of collecting wireless device location data is enabled, only data with the RSSIs of higher than the threshold is collected. The value range is -95 to 0. The default value is -75.

Translation

简体中文

Download

Updated: 2021-11-18

Document ID: EDOC1100096116

Downloads: 2545

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate

Overview

CLI-based Procedure

Web-based Procedure

Related Version

Related Documents

Digital Signature File