Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring APs to Report KPI Information
Service Requirements
KPI information of APs is reported to SDN controller and CampusInsight through the WMI report mechanism.
Data Planning
Item |
Data |
|---|---|
KPI information reported by an AP |
|
Configuration Roadmap
- Configure basic WLAN services.
- Configure parameters for interconnecting APs with the WMI server.
Configuration Notes
- Only some models of APs can report KPI information. For details, see Licensing Requirements and Limitations for KPI Information Report in CLI-based Configuration Guide.
- If the KPI information needs to be reported to only one WMI server, do not configure multiple information report channels to avoid resource waste of the target server.
- Pre-configure network connectivity to ensure that APs can properly communicate with the WMI server.
