Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Web Platform Overview for Cloud Central APs
Table 2-6 describes main functions of the web platform for cloud central APs.
Table 2-6 Web platform overview
Level-1 Menu |
Level-2 Menu |
Function Description |
|---|---|---|
Home |
Summary | Displays connection information and deployment
configurations of the AP.
|
| Central AP Interface | Displays basic information about AP interfaces, such as the interface name, state, negotiation rate, number of sent and received packets and bytes, and STP status. | |
| RU | Displays basic information about RUs, such as the device name, state, MAC address, IP address, type, version, sequence number, traffic, number of connected STAs, STA offline rate, STA access failure rate, online duration, total number of restart times, number of restart times due to power failures, and STA online and offline records. | |
| User | Displays basic information about users, such as the user name, MAC address, IP address, name of the connected device, connected SSID, frequency band, RSSI, access rate, and online and offline records. The function of disconnecting STAs is also provided. | |
| Routing Table | Displays basic information about routes, such as the destination IP address, subnet mask, route type, next hop, and outbound interface. | |
Diagnosis |
One-click Information Collection | Exports a large amount of diagnostic information about the AP to the web_diaginfo.txt file. The information includes the startup configuration, current configuration, interface information, system time, and system version. |
| Ping | Checks whether a destination IP address or host is reachable to determine network connectivity. | |
| Trace Route | Tracks the forwarding path of a packet from the source to the destination. If a network failure occurs, you can use the trace route function to locate the fault. You can specify a destination IP address or host name. | |
| RF-Ping | Checks the quality of wireless links between APs and STAs. | |
| ARP Entry | Displays ARP information about the AP, such as the destination IP address, MAC address, VLAN ID, interface name, and timeout period. | |
Maintenance |
Basic | Displays basic information about the AP, such as the device name, model, MAC address, sequence number, version, number of restart times, maximum number of access STAs, and system operation time. The functions, including version upgrade, configuration file export, and restart statistics reset, are also provided. |
| Alarm & Event | Displays current and historical alarm data, such as the alarm severity, OID, alarm content, module name, time, and alias. The alarm clearing function is also provided. | |
| Log | Supports log host management, provides the log saving and clearing functions, and displays log information such as the time, severity, module name, summary, and content. | |
| Administrator | Displays administrator offline records and user session records, such as the user name, IP address, authentication type, domain name, offline reason, online time, offline time, and session creation time. The function of disconnecting STAs is also provided. | |
| Factory Settings | Deletes current and historical user configurations, and restores the factory settings of the AP. |