No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartLogger3000 User Manual

This document describes the SmartLogger3000 and SmartModule1000A01 in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. BOM number: 02312SCU, 02312SCU-001, 02312SCU-002, 02312SCU-003, 02312SCU-004, 02312SCU-005, 02312SCU-006, 02312SCU-007, 02312SCU-008, 02312SCU-009, 02312SCU-010, 02312SGF, 02312SGG, 02312SGK and 02312SGJ.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set Email Parameters?

How Do I Set Email Parameters?

Context

The SmartLogger can send emails to inform users of the current energy yield information, alarm information, and device status about the PV plant system, helping users know the running conditions of the PV plant system in time.

When using this function, ensure that the SmartLogger can connect to the configured email server and the Ethernet parameters and email parameters are correctly set for the SmartLogger.

Procedure

  1. Set email parameters and click Submit.

    Figure 8-4 Setting email parameters

    Parameter

    Description

    SMTP server

    Set this parameter to the domain name or IP address of the SMTP server.

    Encryption mode

    Set this parameter to the email encryption mode.

    SMTP port

    Set this parameter to the email sending port.

    User name

    Set this parameter to the user name for logging in to the SMTP server.

    Password

    Set this parameter to the password for logging in to the SMTP server.

    Email language

    Set this parameter to the language for sending emails.

    Send address

    Set this parameter to the email address for sending emails.

    Receive address N

    NOTE:

    N is 1, 2, 3, 4, or 5.

    Set this parameter to the email address for receiving emails.

    Yield

    Specifies whether to send energy yield data by email and the time for sending emails.

    Alarms

    Specifies whether to send alarms by email and the severity of the alarms to be sent.

    You can click Send test mail to check whether the SmartLogger can successfully send emails to users.

Troubleshooting

If the error code is not listed in the following table, provide SmartLogger run logs and contact Huawei technical support.

Error Code

Troubleshooting Suggestion

Error Code

Troubleshooting Suggestion

0x2002

  1. Check whether the DNS server address is correctly configured.
  2. Check whether the domain name and the IP address of the SMTP server are correct.
  3. Check whether the network communication between the management system and the DNS server is normal.

0x2003

  1. Try again later.
  2. Check whether the domain name and the IP address of the SMTP server are correct.

0x200b

  1. Check whether the DNS server address is correct.
  2. Check whether the domain name and the IP address of the SMTP server are correct.

0x4016

  1. Try again later.
  2. Check whether the DNS server address is correctly configured.
  3. Check whether the domain name and the IP address of the SMTP server are correct.

0x406e

Confirm the encryption mode and port supported by the email box, and check whether they are correct.

0x8217

  1. Check whether the user name and password are correct.
  2. Log in to the email box of the email sender and start the SMTP service.
  3. Log in to the email box of the email sender and start the third-party client license code function.

0xa003

Check whether the domain name and the IP address of the SMTP server are correct.

0xa005

Enter the user name correctly.

0xa006

Enter the password correctly.

0xe002

Configure the domain/IP of the SMTP server correctly.

0xe003

Configure the addresses for sending and receiving emails correctly.

Others

Please provide SmartLogger running logs and contact Huawei Service Center.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1100108365

Views: 6220

Downloads: 1141

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next