About This Document
Purpose
This document introduces the SmartLogger3000 (SmartLogger for short) and SmartModule1000 (SmartModule for short) in terms of installation, electrical connections, system operation and maintenance, and troubleshooting. Understand the SmartLogger and SmartModule features, functions, and safety precautions provided in this document before installing and operating the SmartLogger and SmartModule.
Intended Audience
This document is intended for operating personnel and qualified electricians of photovoltaic (PV) and energy storage plants.
Symbol Conventions
The symbols that may be found in this document are defined as follows:
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Updates between document issues are cumulative. The latest document issue contains all changes made in previous issues.
Issue 16 (2023-11-07)
Updated Installing a SIM Card and a 4G Antenna.
Updated Preparations and WebUI Login.
Updated Commissioning Using Deployment Wizard (V300R023C00).
Updated Setting Parameters for a Built-in MBUS Module.
Updated Setting SmartMBUS CCO01A Parameters.
Updated Setting PCS Parameters.
Updated Setting CMU Parameters.
Added Setting IMD Parameters.
Updated Setting Battery Control Parameters.
Updated Setting Feature Parameters.
Updated License Management.
Updated Force Start.
Updated Product User Lists.
Added Contact Information.
Added Digital Power Customer Service.
Issue 15 (2023-10-11)
Updated Setting Meter Parameters.
Updated Setting Battery Control Parameters.
Updated Setting DRM Parameters.
Added Device Replacement.
Issue 14 (2023-08-18)
Updated Networking.
Updated Commissioning Using Deployment Wizard (V300R023C00).
Added Setting SPPC Communications Parameters.
Updated Setting PID Module Parameters.
Updated Setting SmartPID2000 Parameters.
Updated Setting Battery Control Parameters.
Updated Setting Feature Parameters.
Updated Setting Parameters for Smart Reactive Power Compensation.
Updated Setting DRM Parameters.
Updated License Management.
Updated Technical Specifications of the SmartLogger.
Issue 13 (2023-06-12)
Updated Appearance.
Updated Appearance.
Updated Preparations and WebUI Login.
Updated Setting Parameters for Connecting to the Management System.
Updated Setting MBUS Parameters.
Updated Setting Active Power Control.
Issue 12 (2023-04-20)
Updated Networking.
Updated Connecting Fiber Jumpers.
Updated Commissioning Using Deployment Wizard (V300R023C00).
Updated Setting Parameters for Connecting to the Management System.
Updated Setting MBUS Parameters.
Updated Setting PID Module Parameters.
Deleted "Setting Capacity Limit".
Updated Setting Battery Control Parameters.
Updated Setting EMS Control Parameters.
Added Setting Feature Parameters.
Issue 11 (2023-01-20)
Updated Safety Information.
Updated Setting ESU Parameters.
Updated Setting Meter Parameters.
Updated Setting Battery Control Parameters.
Updated Setting NS Protection Remote Shutdown.
Updated Force Start.
Updated Device Replacement.
Added Resetting Password.
Updated Which Models of Power Meters and EMIs Are Supported by the SmartLogger?.
Updated Acronyms and Abbreviations.
Issue 10 (2022-08-20)
Updated WebUI Menus.
Updated Preparations and WebUI Login.
Added Commissioning Using Deployment Wizard (V300R023C00).
Updated Setting Parameters for the Slave SmartLogger.
Added Setting GOOSE Communications Parameters.
Updated Setting Inverter Parameters.
Updated Setting PCS Parameters.
Updated Setting CMU Parameters.
Updated Setting ESU Parameters.
Updated Setting HVAC Parameters.
Updated Setting Battery Control Parameters.
Updated Setting STS Parameters.
Updated Setting Active Power Control.
Updated Setting Reactive Power Control.
Updated Alarm Reference.
Updated Exporting Device Logs.
Updated Force Start.
Issue 09 (2022-01-07)
Updated Networking.
Updated Networking.
Updated WebUI Layout.
Updated WebUI Menus.
Added Setting Parameters for Connecting to the Management System.
Updated Setting PCS Parameters.
Updated Setting CMU Parameters.
Updated Setting ESU Parameters.
Updated Setting HVAC Parameters.
Updated Setting Battery Control Parameters.
Added "Setting Capacity Limit".
Updated Setting EMS Control Parameters.
Updated Setting Active Power Control.
Updated Setting Reactive Power Control.
Updated Setting Export Limitation Parameters.
Updated Upgrading the Device Firmware Version.
Updated Sending a System Maintenance Command.
Updated Exporting Device Logs.
Added Managing Users.
Updated Collecting Performance Data.
Updated Adjusting the Total Energy Yield.
Updated Which Models of Power Meters and EMIs Are Supported by the SmartLogger?.
Issue 08 (2021-10-15)
Updated Networking.
Updated Networking.
Updated WebUI Layout.
Updated WebUI Menus.
Updated Device Commissioning.
Updated Preparations and WebUI Login.
Added Commissioning Using Deployment Wizard (V800R021C10).
Updated Setting User Parameters.
Updated Setting Parameters for Connecting to the Management System (V300R001C00).
Added Setting PCS Parameters.
Added Setting CMU Parameters.
Added Setting ESU Parameters.
Added Setting ESC Parameters.
Added Setting ESR Parameters.
Added Setting HVAC Parameters.
Added Setting Battery Control Parameters.
Updated Setting Active Power Control.
Updated Setting Export Limitation Parameters.
Updated Troubleshooting.
Updated Alarm Reference.
Updated Upgrading the Device Firmware Version.
Updated Exporting Device Logs.
Updated Port No. List.
Updated Acronyms and Abbreviations.
Issue 07 (2021-06-30)
Updated Introduction to WebUI.
Updated WebUI Menus.
Updated Running Parameters.
Added Battery.
Added Setting EMS Control Parameters.
Updated Setting Active Power Control.
Updated Exporting Device Logs.
Updated Starting an Onsite Test.
Updated Which Models of Power Meters and EMIs Are Supported by the SmartLogger?.
Issue 06 (2021-03-20)
Updated Setting Parameters for Connecting to the Management System (V300R001C00).
Updated Running Parameters.Running Parameters
Updated Tracking System.
Updated Setting DL/T645 Meter Parameters.
Updated Setting Modbus-RTU Meter Parameters.
Updated Setting Modbus-RTU EMI Parameters.
Added Smart Tracking Algorithm.
Updated Setting Active Power Control.
Updated Setting Export Limitation Parameters.
Updated Setting Parameters for Smart Reactive Power Compensation.
Added Setting Remote Shutdown.
Updated Setting Dry Contact Remote Shutdown.
Added Setting NS Protection Remote Shutdown.
Added Exporting Full Configuration Files.
Added Importing Full Configuration Files.
Updated How Do I Use Mobile Network Sharing?.
Added WebUI Allows Login Only in Chinese and Prompts to Switch to Chinese.
Issue 05 (2020-09-30)
Updated Setting Parameters for Connecting to the Management System (V300R001C00).
Updated Setting MBUS Parameters.
Added How Do I Use Mobile Network Sharing?.
Added Port No. List.
Issue 04 (2020-03-11)
Updated Preparations and WebUI Login.
Issue 03 (2020-01-10)
Added the description about the SmartModule.
Issue 02 (2019-12-18)
Updated WebUI Operations.
Updated Technical Specifications of the SmartLogger.
Issue 01 (2019-09-24)
This issue is used for first office application (FOA).