No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SmartLogger3000 User Manual

This document describes the SmartLogger3000 and SmartModule1000A01 in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. BOM number: 02312SCU, 02312SCU-001, 02312SCU-002, 02312SCU-003, 02312SCU-004, 02312SCU-005, 02312SCU-006, 02312SCU-007, 02312SCU-008, 02312SCU-009, 02312SCU-010, 02312SGF, 02312SGG, 02312SGK and 02312SGJ.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Security Parameters

Setting Security Parameters

Figure 7-2 Security settings



Password Change

Change the password for the current login user to log in to the WebUI.

Automatic logout time

After this parameter is set, a user is automatically logged out if the user does not perform any operation within the period specified by this parameter.

WebUI Security Certificate

You are advised to use the existing network security certificate and key.

Update Key

Update the key for saving the password.

SmartModule Security Certificate

Load the network security certificate of the SmartModule.

If the private key file has a password, select Enable key password and enter the key password obtained from the certificate provider.

Communication using expired certificate

Specifies whether to enable communication using an expired certificate.

If this parameter is set to Enable, the SmartLogger can communicate with the SmartModule. After the certificate expires, set this parameter to Disable to prevent the SmartLogger from communicating with the SmartModule to ensure network security.

TLS1.0 enable

Enables or disables the TLS1.0 function.

Digital signature verification for upgrade package

  • If this parameter is set to Enable, the upgrade package must contain the digital signature file and the upgrade package must not be modified.
  • If this parameter is set to Disable, the digital signature of the upgrade package is not verified.
Updated: 2020-02-21

Document ID: EDOC1100108365

Views: 7758

Downloads: 1328

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next