No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SmartLogger3000 User Manual

This document describes the SmartLogger3000 and SmartModule1000A01 in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. BOM number: 02312SCU, 02312SCU-001, 02312SCU-002, 02312SCU-003, 02312SCU-004, 02312SCU-005, 02312SCU-006, 02312SCU-007, 02312SCU-008, 02312SCU-009, 02312SCU-010, 02312SGF, 02312SGG, 02312SGK and 02312SGJ.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The SmartModule is a dedicated device for the monitoring and management platform of PV power systems. It converges ports, converts protocols, and collects data for devices in PV power systems. It extends ports for the SmartLogger.


The SmartModule applies to PV power systems. It supports the following:

  • RS485 networking, which enables the SmartModule to connect to:
    • Huawei devices such as solar inverters and PID modules
    • Third-party solar inverters, EMIs, transformer stations, and power meters that use the Modbus-RTU protocol
    • Power meters that use the DL/T645 protocol
    • Devices that use the IEC103 protocol
  • The SmartLogger can be connected over Ethernet.
Figure 2-11 Networking
Updated: 2020-01-17

Document ID: EDOC1100108365

Views: 6315

Downloads: 1148

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next