Setting SPPC Communications Parameters
The parameters can be configured only for V300R023C10 and later versions.
Choose , set the SPPC parameters, and click Submit.
Parameter |
Description |
|
|---|---|---|
SPPC |
SPPC IP |
IP address of the SPPC. If the SPPC address is not configured, the SmartLogger obtains the SPPC address through the automatic discovery process. You can set the IP address to 0.0.0.0 and the port number to 65535 to manually start automatic device discovery. |
SPPC port number |
Port number used by the SmartLogger to connect to the SPPC. |
|
Connection Status |
Status of the SPPC connection. |
|
Security Certificate |
Upload CA certificate file |
Update the CA certificate file. A CA certificate is a root certificate obtained from a CA. It is also called a trust certificate and is used to verify the identity certificate of the peer end. |
Upload local certificate file |
Update the local certificate file. This is an identity certificate obtained from a CA. It is also called a device certificate and contains the public key of a device. During the establishment of a link with the peer end, the peer end uses its CA certificate to verify the validity and parses the certificate to obtain the public key of the local end. |
|
Upload key file |
Update the key file. The secret key file is a certificate private key and is used by itself. After a link is established with the peer end, the secret key file is used to encrypt and send data. |
|
Enable key password |
Whether to encrypt the key file. If this function is enabled, set Key password and Confirm key password. |
|