No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartLogger3000 User Manual

This document describes the SmartLogger3000 and SmartModule1000A01 in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. BOM number: 02312SCU, 02312SCU-001, 02312SCU-002, 02312SCU-003, 02312SCU-004, 02312SCU-005, 02312SCU-006, 02312SCU-007, 02312SCU-008, 02312SCU-009, 02312SCU-010, 02312SGF, 02312SGG, 02312SGK and 02312SGJ.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Icon Description

Icon Description

Icon

Description

Icon

Description

Click the About icon to query the WebUI version information.





Click the Drop-down icon to select a parameter or time.

Click the Exit icon to log out.

Alarms are classified into major, minor, and warning ones. Click the Alarm icon to query an alarm.





Click the Increase/Decrease icon to adjust time.

Click the Start icon to start the device.





The Select icon indicates that a parameter is selected.

Click the Stop icon to shut down the device.





The Select icon indicates that a parameter is not selected. Click the icon to select a parameter.

Click the Reset icon to reset the device.

Hide icon and Display icon.

  • The solar inverter is in On-grid state.
  • The device such as the EMI, power meter, slave SmartLogger, or MBUS is in Online state.
  • The PID is in Running state.

The device is in Disconnection state.

If a device is in Disconnection state, its parameters cannot be set.

The solar inverter is in Loading state.

  • The solar inverter is in Initializing, Power-off, Idle, or other state in which it is not feeding power into the grid.
  • The PID device is in Power-off, Idle or other state in which it is not running properly.

Ascending order or descending order icon. Click the icon to sort the items in ascending or descending order for the corresponding column.

Translation
Download
Updated: 2020-02-21

Document ID: EDOC1100108365

Views: 6921

Downloads: 1228

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next