No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartLogger3000 User Manual

This document describes the SmartLogger3000 and SmartModule1000A01 in terms of installation, electrical connections, system operation, maintenance, and troubleshooting. BOM number: 02312SCU, 02312SCU-001, 02312SCU-002, 02312SCU-003, 02312SCU-004, 02312SCU-005, 02312SCU-006, 02312SCU-007, 02312SCU-008, 02312SCU-009, 02312SCU-010, 02312SGF, 02312SGG, 02312SGK and 02312SGJ.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Change the Communications Address?

How Do I Change the Communications Address?

The SmartLogger allows you to change the communications addresses of Huawei devices on the Connect Device or Device List page.

Changing the Communications Address on the Connect Device Page

  1. Choose Maintenance > Device Mgmt. > Connect Device.
  2. Click Auto Assign Address, set the start address for assignment, and confirm the address assignment.
  3. Confirm the address adjustment, adjust the device address as required, and click Address Adjustment.
  4. Confirm to search for the device again.
  5. After the search is complete, click Close.

Changing the Communications Address on the Device List Page

  1. Choose Maintenance > Device Mgmt. > Device List.
  2. Change the device communications address and device name based on the site requirements, select the modified entries, and click Modify Device Info.
  3. Choose Maintenance > Device Mgmt. > Connect Device and click Auto. Search.
  4. After the search is complete, click Close.
Translation
Download
Updated: 2020-02-21

Document ID: EDOC1100108365

Views: 6805

Downloads: 1214

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next