Sending a System Maintenance Command
Function |
Description |
|---|---|
Resets the SmartLogger, which will automatically shut down and restart. |
|
|
|
Clears all historical data of the SmartLogger. |
|
Before replacing the SmartLogger, export the SmartLogger configuration file to a local PC. |
|
After replacing the SmartLogger, import the local configuration file to the new SmartLogger. After the import is successful, the SmartLogger restarts for the configuration file to take effect. Ensure that the parameters on the Settings tab page and the parameters for the built-in MBUS are correctly set. |
|
You can clear the temporary files and upgrade package files stored on the SmartLogger through Clear Cache. |
Exporting Full Configuration Files
Procedure
- Choose . and click Export under Full profile export.
During the export of the full configuration files, you need to enter Password of the current user and set Encryption password of the exported file in the Re-authentication dialog box.
Figure 7-4 Exporting full configuration files - After the export is successful, click Confirm. Click Save under Full profile export to save the full configuration files.
Importing Full Configuration Files
Procedure
- Choose Maintenance > System Maint. and click Import under Full profile import.
During the import of the full configuration files, you need to enter Password of the current user and Decryption password of the imported file in the Re-authentication dialog box.
- If Encryption password of the exported file has not been set for the exported full configuration files, deselect Decryption password of the imported file in the Re-authentication dialog box when importing the files.
- If Encryption password of the exported file has been set for the exported full configuration files, you need to set Decryption password of the imported file in the Re-authentication dialog box when importing the files.
- When a faulty SmartLogger3000 is replaced, certificate-related files are not exported. After the full configuration files are imported, you need to reload a third-party certificate if required.
Figure 7-5 Importing full configuration files - Click Choose File, select all exported files, and click Import.
