Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Power Adapter
A power adapter can be installed on a wall or flat surface.
If the SmartLogger requires a power adapter for power supply, install a power adapter.
Wall-mounted installation
It is recommended that the power adapter be installed on the right side of the SmartLogger. Keep the AC power cable port upward.
Avoid drilling holes into the water pipes and power cables buried in the wall.
Figure 3-9 Wall-mounted Installation (Mode 1)
![]()
Figure 3-10 Wall-mounted Installation (Mode 2)
![]()
Flat Surface-mounted Installation
Install the power adapter on a flat surface. This section describes how to install the power adapter on the top of the SmartLogger.
- Place the power adapter horizontally on the top of the SmartLogger.
- Ensure that the power adapter indicator faces upward or outward.
- Ensure that the adapter is securely installed.
- Plan the cable route of the power adapter to ensure that the SIM card can be installed properly.Figure 3-11 Flat surface-mounted installation
