Preparing Cables
Type |
Recommended Cable Specifications |
|---|---|
PE cable |
Outdoor copper-core cable with a cross-sectional area of 4–6 mm2 or 12–10 AWG |
Network cable |
The cable is delivered with the SmartModule and is 0.35 m long. If the delivered network cable is too short, you are advised to prepare a network cable of Cat 5e or higher specifications and shielded RJ45 connectors. |
12 V power input cable |
The cable is delivered with the SmartModule and is 0.5 m long. |
RS485 communications cable |
Two-core or multi-core outdoor shielded cable with a cross-sectional area of 0.2–2.5 mm2 or 24–14 AWG |
DI signal cable |
Two-core or multiple-core cable with a cross-sectional area of 0.2–1.5 mm2 or 24–16 AWG |
Output power cable |
|
AI signal cable |
|
PT signal cable |
For details about the cables and cable connection operations, see the documents delivered with the PT100/PT1000. |
(Optional) 24 V power input cable |
Two-core cable with a cross-sectional area of 0.2–1.5 mm2 or 24–16 AWG |